MPC564EVB Freescale Semiconductor, MPC564EVB Datasheet - Page 16

• Manufacturer Part Number: MPC564EVB
• Description: KIT EVAL FOR MPC561/562/563/564
• Manufacturer: Freescale Semiconductor
• Type: Microcontrollerr

Specifications of MPC564EVB

• Contents: Module Board, Installation Guide, Power Supply, Cable, Software and more
• Processor To Be Evaluated: MPC56x
• Data Bus Width: 32 bit
• Interface Type: RS-232, Ethernet
• For Use With/related Products: MPC561, 562, 563, 564
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

System Memory
Since the MPC564 chip selects are fully programmable, the memory banks can be located at any
location in the MPC5xx memory space.
Following is the default memory map for this board as configured by the Debug Monitor located
in the external flash bank. The internal memory space of the MPC564 is detailed further in the
MPC561/3 Users Manual. Chip Selects 0-3 can be changed by user software to map the external
memory in different locations but the chip select configuration such as wait states and transfer
acknowledge for each memory type should be maintained.
Possible Chip Select usage:
Synchronous SRAM Memory Bank
Synchronous FLASH Memory Bank
10/100T / LCD Port
MPC564 Internal Flash
ory map of chip selects
The MPC564EVB Default Memory Map shows the MPC564EVB memory map.
1.2.5.1
The MPC564EVB board has two internal memory banks, two external memory banks and a
Peripheral memory bank that provide:
1-6
Memory Device / Bank Selection and Configuration.
0x0000_0000 - 0x0007_FFFF
0x0008_0000 - 0x002F_7FFF
0x002F_8000 - 0x002F_87FF
0x002F_8800 - 0x002F_9FFF
0x002F_A000 - 0x002F_BFFF
0x002F_C000 - 0x002F_FFFF
0x0030_0000 - 0x0030_7FFF
0x0030_8000 - 0x0037_FFFF
0x0038_0000 - 0x0038_007F
0x0038_0080 - 0x0038_3FFF
0x0038_4000 - 0x003F_7FFF
0x003F_8000 - 0x003F_FFFF
0x0080_0000 - 0x00A0_0000
0x0100_0000 - 0x0108_0000
0xFFF0_0000 - 0xFFF8_0000
Table 1-1. The MPC564EVB Default Memory Map
Address Range
Freescale Semiconductor, Inc.
For More Information On This Product,
MPC564EVB User’s Manual
Go to: www.freescale.com
CS0 or CS1
CS0 or CS2
CS3
N/A
512KByte UC3F Flash
Reserved for Flash
BBC DECRAM 2 KBytes
Reserved for BBC
BBC Control
USIU & Flash Control
UIMB I/F & IMB Modules 32KBytes
Reserved for IMB
CALRAM/READI Control
Reserved (L-bus Control)
Reserved (L-bus Memory)
CALRAM (internal SRAM)
External Flash 2MByte (0x0090_0000 -
0x00A0_0000 reserved for dBUG)
Ethernet
External SRAM 512KByte
Signal and Device
default CS1, MAP SW. 1,2
default CS0, MAP SW. 3,4
default CS3, MAP SW. 6,7
MAP_SW. 8, may effect mem-