30010 Parallax Inc, 30010 Datasheet - Page 2

• Manufacturer Part Number: 30010
• Description: BASIC STAMP LOGIC ANALYZER
• Manufacturer: Parallax Inc

Specifications of 30010

• Accessory Type: Logic Analyzer
• Product: Microcontroller Accessories
• Interface Type: USB
• Flash: 128 Bytes
• Operating Supply Voltage: 0.8 V
• Board Size: 32.15 mm x 20 mm x 17 mm
• For Use With/related Products: BASIC Stamp®
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: Q2119020A

Packing List
Verify that your BSLA kit is complete in accordance with the list below:
The BSLA PC software is available for download from our web site at
http://www.parallax.com/detail.asp?product_id=300010 and is not included in the BSLA kit.
BSLA Software Installation
First, install the BSLA software before any hardware is connected. Download, unzip the files and run the
“Setup.exe” program. The BSLA software is compatible with Windows 2000/XP. The software will also
install the drivers for the Cypress USB chip used on the BSLA hardware and make the necessary addition
to your Windows registry file.
BSLA Hardware Setup
Next, install the BSLA module. The BSLA module fits between any Parallax 24-pin microcontroller and the
programming socket. To install the BSLA hardware on a Parallax board:
Parallax, Inc. • BASIC Stamp Logic Analyzer (#30010) • 02/2005
BASIC Stamp Logic Analyzer installed on a Parallax
•
•
1. Disconnect power.
2. Remove your 24-pin Parallax module from the pcb socket.
3. Firmly insert the BSLA module noting the location of pin 1, denoted by the notch in the top of the
4. Replace the 24-pin Parallax module in the BSLA’s socket.
5. Connect the USB mini-B cable to the BSLA and to the USB 2.0 port on the PC.
6. Plug in power.
BASIC Stamp Logic Analyzer module
USB A to Mini B cable
BSLA’s black socket. On the Board of Education, the BSLA’s USB connector will be oriented
opposite to the power jack as shown below.
Board of Education.
Page 2