ST7MDT20-EVY/US STMicroelectronics, ST7MDT20-EVY/US Datasheet - Page 23

• Manufacturer Part Number: ST7MDT20-EVY/US
• Description: BOARD EVALUATION/TRAINING/PROGRM
• Manufacturer: STMicroelectronics

Specifications of ST7MDT20-EVY/US

• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: 497-2898

Figure 10. C-Language Timer Resource Files
The linker parameter file (enviro.prm) and the makefile (enviro.mak) file have been placed in
the working directory. If an editor such as Winedit is used in place of the STVD7 program,
please refer to Application Note AN 989 ‘Starting with ST7 Hiware C’ available on Internet
(http://mcu.st.com.
The Default.env and Project.ini files are used to configure the Hiware C Toolchain and the text
editor. These two files are automatically created by the Hiware setup program in the Configu-
ration dialog box.
All files are ready-for-use, except for the main.c and itenviro.c files. In order to be able to use
these files, the following procedure must be completed:
I
– Configure pin PF0 as a push-pull output.
– Enter the calculated value for the pulse length and the period length in TAOC1R and
– Configure the 16-bit timer in PWM mode.
– Enable the interrupt process and wait for interrupts.
In the main.c file, write the instructions that:
TAOC2R registers using the datasheet formula.
Then select “ST7”, “Technical Documentation”, “Application Notes”.)
TRAINING EXERCISES
23/33