101-1053 Rabbit Semiconductor, 101-1053 Datasheet - Page 17

• Manufacturer Part Number: 101-1053
• Description: KIT DEV RABBITCORE RCM3365 US
• Manufacturer: Rabbit Semiconductor
• Series: RabbitCore 3000r
• Type: MPU Core Moduler

Specifications of 101-1053

• Contents: RabbitCore Module, Dev. Board, AC Adapter, Cable and Dynamic C® CD-Rom
• Processor To Be Evaluated: RCM3365
• Interface Type: Ethernet
• Maximum Operating Temperature: + 70 C
• Operating Supply Voltage: 3.15 V to 3.45 V
• For Use With/related Products: RCM3365
• Lead Free Status / RoHS Status: Lead free by exemption / RoHS compliant by exemption
• Other names: 316-1074

2.2.2 Step 2 — Connect Serial Programming Cable
The serial programming cable connects the RCM3365/RCM3375 to the PC running
Dynamic C to download programs and to monitor the module during debugging.
Connect the 10-pin connector of the serial programming cable labeled
on the RCM3365/RCM3375 module as shown in Figure 3. There is a small dot on the cir-
cuit board next to pin 1 of header J1. Be sure to orient the marked (usually red) edge of the
cable towards pin 1 of the connector. (Do not use the
nonprogramming serial connection.)
Connect the other end of the serial programming cable to a COM port on your PC.
User’s Manual
NOTE: Be sure to use the serial programming cable (part number 101-0542) supplied
NOTE: Some PCs now come equipped only with a USB port. It may be possible to use
with this Development Kit—the serial programming cable has blue shrink wrap around
the RS-232 converter section located in the middle of the cable. Programming cables with
clear or red shrink wrap from other Rabbit kits are not designed to work with RCM3365/
RCM3375 modules.
an RS-232/USB converter (Part No. 20-151--0178) with the serial programming cable
supplied with the RCM3365/RCM3375 Development Kit. Note that not all RS-232/
USB converters work with Dynamic C.
Figure 3. Connect Serial Programming Cable and Power Supply
DIAG
connector, which is used for a
PROG
to header J1
11