QB-179F124-T38MC Renesas Electronics America, QB-179F124-T38MC Datasheet - Page 29

• Manufacturer Part Number: QB-179F124-T38MC
• Description: 179F IECUBE 38 SSOP T-TYPE
• Manufacturer: Renesas Electronics America

Specifications of QB-179F124-T38MC

• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

2.7
2.8
2.9
plug the other side into the USB connector on the rear of the QB-179F124.
supply connector on the rear of the QB-179F124.
For power supplies and GND pins of the target device, be sure to connect all pins to each power supply or GND.
Plug the USB interface cable supplied with the QB-179F124 into the USB connector of the host machine, and
Plug the AC adapter supplied with the QB-179F124 into a receptacle and plug the other side into the power
For QB-179F124 connector positions, see Figure 2-9.
Be sure to switch the power on and off according to the following procedures.
Notes on Power Supply and GND Pin Connection
Connecting USB Interface Cable and AC Adapter
Switching Power On and Off
- Switching power on
<1> QB-179F124 power on
<2> Target system power on
<3> Debugger startup
Note In the procedures, <2> is unnecessary if the target system is not connected.
Caution If the wrong sequence was used for the operation, the target system or QB-179F124 may fail.
Note
CHAPTER 2
Preliminary User’s Manual U18586EJ1V0UM
Figure 2-9. Connector Positions
- Switching power off
<1> Debugger termination
<2> Target system power off
<3> QB-179F124 power off
SETUP PROCEDURE
Power supply connector
(Connect AC adapter)
USB connector
(Connect USB interface cable)
Note
27