HS0AE4XEPI61H Renesas Electronics America, HS0AE4XEPI61H Datasheet - Page 104

• Manufacturer Part Number: HS0AE4XEPI61H
• Description: EMULATOR BASE UNIT AE4
• Manufacturer: Renesas Electronics America
• Type: Smart Cardr

Specifications of HS0AE4XEPI61H

• Contents: E6000 Emulator and CD-ROM
• For Use With/related Products: AE-4X
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

This section describes the diagnostic test procedure using the E6000 emulator test program.
5.1
To execute the test program, use the following hardware; do not connect the user system interface
cable and user system.
1. Install the E6000 PC interface board in the host computer and connect the supplied PC
2. Connect the PC interface cable to the AE-4X E6000.
3. Connect the supplied AC adapter to the AE-4X E6000.
4.
5. Turn on the E6000 switch.
AE-4 E6000 emulator (HS0AE4XEPI61H)
Host computer (MS-DOS)
E6000 PC interface board (One of the following interface boards is shown in this manual.
Prepare a suitable one according to your PC interface specifications.)
ISA bus interface board (HS6000EII01H)
PCI bus interface board (HS6000EIC01H, HS6000EIC02H)
PCMCIA interface card (HS6000EIP01H)
LAN interface adapter (HS6000ELN01H)
interface cable to the board.
Initiate the host computer to make it enter DOS prompt command input wait state.
System Set-Up for Test Program Execution
Section 5 Diagnostic Test Procedure
81