M34509T2-CPE Renesas Electronics America, M34509T2-CPE Datasheet - Page 31

• Manufacturer Part Number: M34509T2-CPE
• Description: DEV TOOL COMPACT EMULATOR: 4508/
• Manufacturer: Renesas Electronics America
• Type: In Circuit Debuggerr

Specifications of M34509T2-CPE

• Contents: Compact Emulator, IDE, Assembler and Linker
• For Use With/related Products: 4508, 4509
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

M34509T2-CPE User’s Manual
2.6.2 If an Error is Detected in the Self-check
Table 2.4 lists how to remedy the troubles if the target status LED display is abnormal in the self-check. When an error is
detected, shut off the emulator and the user system and follow the steps in the Table 2.4.
Table 2.4 Error display in the self-check and how to remedy it
REJ10J0543-0200 Rev.2.00 Sep. 25, 2006
Notes on the Self-check:
POWER
CLOCK
LED display
Blinking
Be sure to disconnect the user system before executing the self-check.
Use the preinstalled oscillator circuit board (OSC-2, 6MHz) to execute the self-check.
If the self-check does not result normally (excluding target status errors), the emulator may be damaged. Then,
contact your local distributor.
Others
RESET
OFF
RUN
The MCU is not controlled properly.
The emulator system is not working properly.
- Check that power is supplied to the emulator.
- The emulator may be damaged. Contact your local distributor.
A clock is not supplied to the emulator.
- Check that the oscillator circuit board (OSC-2) is attached.
- Check that the oscillator or oscillation module on an oscillator circuit board (OSC-2) is
- Check that the MCU is mounted properly
- Check that the oscillation frequency of the oscillator circuit board (OSC-2) is within
The emulator system is not working properly.
- The emulator may be damaged. Contact your local distributor.
operating normally.
the MCU specifications.
IMPORTANT
Problem & Remedy
Page 29 of 72
2. Setup