EPSILON5-A1 Equinox Technologies, EPSILON5-A1 Datasheet - Page 45

• Manufacturer Part Number: EPSILON5-A1
• Description: ISP PORTABLE PROGRAMMER USB
• Manufacturer: Equinox Technologies
• Series: Epsilon5r
• Type: Portable ISPr

Specifications of EPSILON5-A1

• Contents: Programmer, Software, Cables and Documentation
• Ic Product Type: In-Circuit Programmer
• Features: 2Mbits Of On-Board Non-Volatile FLASH Memory For User Project Storage
• Interface Type: JTAG
• Mcu Supported Families: ATmega And AT91SAM7
• Mpu Supported Families: AVR
• Rohs Compliant: Yes
• External Depth: 31mm
• Height: 189mm
• Length: 80mm
• For Use With/related Products: ATMEL AT89S, AVR, AT91SAM7, NXP P89C51Rx2 P89C66x, Zensys, Serial EEPROM's
• Other names: 483-1000

2.6.4 Executing a Programming Project in Standalone Mode
#
1
2
3
4
5
6
For detailed instructions of operating the programmer in Standalone Mode, please refer to the
relevant sections of the manual as detailed in the table below:
#
1
2
3
4
5
34
Power Supply Scenario
Power Supply Schematic Overview
Earthing requirements
Programmer powers the Target System
Target System powers the Programmer
Programmer and Target System are
independently powered
Action
Connect the programmer to a spare PC COM
port
Apply power to the Programmer / Target
System
See section 3 for Power Supply scenarios
Upload your ‘Programming Project(s)’ to the
programmer
Disconnect power from the Programmer /
Target System
Disconnect the serial lead from the
programmer
Follow relevant instructions in section 3 to
program a Target Device.
EPSILON5 MKII Programmer - User Guide V1.12 – 1
-
-
Observation / comment
To upload ‘Programming Project(s)’ to the
programmer:
All uploaded Programming Projects will be
retained by the programmer in on-board non-
volatile FLASH memory.
The instructions to program a device in
‘Standalone Mode’ differ depending on how the
programmer and Target System are powered.
Jumper J9
FITTED
FITTED
NOT FITTED 3.1 – 5.0
Programmer Target Vcc LED illuminates
Programmer is no longer controlled from PC
•
•
•
•
•
Locate your Project Collection (*.ppc)
file.
Click the <Upload< icon
Follow the on-screen instructions to
upload your Project Collection to the
programmer.
Your Project(s) are now resident in
the memory of the Programmer.
See EQTools Manual – Project
Upload Wizard for full instructions.
The <Upload Wizard> utility will
launch
Voltage (V)
-
-
3.1 – 5.0
3.1 – 5.0
Refer to section
3.2
3.3
3.4
3.5
3.6
st
August 2007