CY3660 Cypress Semiconductor Corp, CY3660 Datasheet - Page 19

• Manufacturer Part Number: CY3660
• Description: KIT DEV ENCORE V AND DVK
• Manufacturer: Cypress Semiconductor Corp
• Series: enCoRer
• Type: MCUr

Specifications of CY3660

• Contents: 4 Boards, Cable, CD, CY3210-MPAdapter, LCD Module, MiniProg Programmer, Power Supplies, Wire Kit
• Lead Free Status / RoHS Status: Not applicable / Not applicable
• For Use With/related Products: Cypress PSOC MCU
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Not applicable / Not applicable

5.3
5.4
CY3660-enCoRe V and enCoRe V LV DVK Kit Guide, Doc. # 001-41500 Rev. **
J5
J3
J1
P2 for LP
Radio
P7
11. J5 is used to select the fixed 3.3V VREG or Adjustable VREG from 3.66V to 1.63V. In the begin-
12. Connect AC adapter to P1.
Figure 5-2. WUSB_Example Keyboard
Results for Bind
After the bridge is enumerated and the LEDs are off, press the Bind button S1 on the bridge and the
Bind button S5 on the keyboard to complete the 'binding' process. While in the bind mode, the LED2
on the bridge blinks until the Bind button is pushed on the keyboard. The bridge LED2 stops blinking
to indicate the keyboard is now ready for normal operation. Please notice that the bridge LED2 also
will stop blinking after 20 seconds timeout without receiving any bind request from the keyboard.
Results for Key Pressing
User presses buttons on the keyboard that represent Num Lock key, Caps Lock key, and Scroll Lock
key. The keystroke data will be sent through the air to the bridge, which will transfer this data to the
PC. After receiving the data from the bridge, the PC will process the Num /Caps /Scroll Lock data
and return the LED information to the bridge and then the keyboard. Finally, the keyboard OCD chip
turns on/off the corresponding LEDs.
ing, it is suggested to use fixed 3.3V VREG.
P10
Wireless USB Example
S1, Num Lock
S2, Caps Lock
S3, Scroll Lock
S5, Bind
LED1, Num
LED2, Caps
LED3, Scroll
LED3, Scroll
19
[+] Feedback