SDK-XAM3517-10-256512R Logic, SDK-XAM3517-10-256512R Datasheet - Page 11

• Manufacturer Part Number: SDK-XAM3517-10-256512R
• Description: KIT DEV ZOOM EXPERIMENTER AM3517
• Manufacturer: Logic
• Series: Zoom™r
• Type: Single Board Computers (SBC)r

Specifications of SDK-XAM3517-10-256512R

• Contents: Board, Adapter, Cables, Documentation, Power Supply, Software
• For Use With/related Products: AM3517
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 460-3486; SDK-XAM3517-10-256512R

6.2
6.3
7
PN 1014539 Rev 1
1. The VCP driver is available for download from FTDI's website. A link is available in the
2. The driver will be downloaded as a ZIP file which must be unzipped before the driver can be
3. If running Windows XP SP1, please refer to the "Windows XP Installation Guide" located on
4. Plug the USB cable into a USB port on your computer and the USB B device on the
5. When prompted to allow Windows to search for the driver, select "No not this time."
6. A Windows XP Found New Hardware Wizard window will open for a second time. Follow
7. Your system should now recognize the new hardware.
8. If you encounter any problems during this installation, please refer to FTDI's website for
Before Using
■
■
Additional Notes
■
■
Install Software
The AM3517 Development Kits include a Board Support Library (BSL) that allows for interaction
with the AM3517 EVM or eXperimenter Kit and helps with diagnostics. This BSL is provided on a
software CD included with the EVM Development Kit or as a download for the eXperimenter Kit.
The BSL works in conjunction with toolchains from CodeSourcery which must be installed on the
development PC prior to using the BSL.
introduction above or on Logic's product downloads page. (NOTE: There may be multiple
drivers available on the FTDI website for this device; only the VCP driver is required.)
installed.
the FTDI website for special precautions to observe while installing the driver.
development kit. The Windows XP "Found New Hardware Wizard" will automatically appear.
(NOTE: The USB A to B cable is only included with the EVM Development Kit. For
eXperimenter Kit users, a USB A to B cable is commonly available for purchase at a wide
variety of retailers.)
□
□
□
same procedure as Step 5 above. This installation process should complete by itself with a
message stating "USB Serial Port successfully installed."
troubleshooting recommendations.
Go to the Device Manager on your computer to determine what COM port is associated with
the USB/Serial Port.
Set up the serial configuration as described in the corresponding QuickStart Guide.
When using this feature, the DB9 Serial Port on the baseboard is disabled whenever the USB
cable is connected to the USB B port.
The power supply included with the development kit needs to be plugged into an electrical
outlet for the USB device to be recognized by the computer. However, the development kit
does not need to be powered on for the device to be recognized.
Install from a list or specific location (advanced)
Browse to the location of the unzipped folder containing driver.
The installation process should complete by itself with a message stating "USB Serial
Converter successfully installed."
Logic Product Development Company, All Rights Reserved
PRELIMINARY DOCUMENT—SUBJECT TO CHANGE
AM3517 Development Kits User Manual
8