DEMO9S08QG8E Freescale Semiconductor, DEMO9S08QG8E Datasheet - Page 15

• Manufacturer Part Number: DEMO9S08QG8E
• Description: BOARD DEMO FOR MC9S08QG8
• Manufacturer: Freescale Semiconductor
• Type: MCUr

Specifications of DEMO9S08QG8E

• Contents: Board
• Processor To Be Evaluated: MC9S08QG8
• Data Bus Width: 8 bit
• Interface Type: RS-232, USB
• Silicon Manufacturer: Freescale
• Core Architecture: HCS08
• Core Sub-architecture: HCS08
• Silicon Core Number: MC9S08
• Silicon Family Name: S08QG
• Kit Contents: MC9S08QG8 Board, Software, Cables, Connectors
• Rohs Compliant: Yes
• For Use With/related Products: MC9S08QG4, MC9S08QG8
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

2. Connect auxiliary equipment to board if needed.
3. Install and launch CodeWarrior Development Studio for HC(S)08, P&E PKGHCS08, or
4. Configure the board option jumpers as shown.
Table 4: Debug Mode Setup
5. Connect the supplied USB cable between an available USB port on the host PC and the
6. Hosting development software will establish background communication.
Application development and debug for the target MC9S08QG8 is supported through the BDM
interface. The debug interface consists of an integrated USB-BDM debugger and an optional
6-pin header (BDM_PORT). The BDM_PORT header is not installed in default configuration
and may be installed by the user if needed.
Freescale Semiconductor
other software capable of communicating with the HCS08 MCU.
USB connector on the board.
PWR_SEL
COM_EN
VX_EN
USER_EN
Set to VB
Set to PTA4
ON If Required
ON if Required
15