101-0678 Rabbit Semiconductor, 101-0678 Datasheet - Page 16

• Manufacturer Part Number: 101-0678
• Description: KIT DEV RABBITCORE/RCM3600
• Manufacturer: Rabbit Semiconductor
• Series: RabbitCore 3000r
• Type: MPU Moduler

Specifications of 101-0678

• Rohs Status: RoHS non-compliant
• Contents: RabbitCore Module, Dev. Board, AC Adapter, Cable and Dynamic C® CD-Rom
• Processor To Be Evaluated: RCM3600
• For Use With/related Products: RCM3600
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 316-1037

2.2.3 Connect Power
When all other connections have been made, connect the wall transformer to 3-pin header
J4 on the Prototyping Board as shown in Figure 3. The connector may be attached either
way as long as it is not offset to one side.
Plug in the wall transformer. The LED above the
button on the Prototyping Board
RESET
should light up. The RCM3600 and the Prototyping Board are now ready to be used.
NOTE: A RESET button is provided on the Prototyping Board to allow a hardware reset
without disconnecting power.
2.2.3.1 Overseas Development Kits
Development kits sold outside North America include a header connector that may be
connected to 3-pin header J4 on the Prototyping Board. The connector may be attached
either way as long as it is not offset to one side. The red and black wires from the connec-
tor can then be connected to the positive and negative connections on your power supply.
The power supply should deliver 7.5 V–30 V DC at 500 mA.
10
RabbitCore RCM3600