101-1274 Rabbit Semiconductor, 101-1274 Datasheet - Page 68

• Manufacturer Part Number: 101-1274
• Description: KIT DEV STANDARD RCM5700
• Manufacturer: Rabbit Semiconductor
• Series: MiniCore™r
• Type: MCUr

Specifications of 101-1274

• Interface Type: Ethernet, SPI
• Operating Temperature Range: - 40 C to + 85 C
• Product: Modules
• Silicon Manufacturer: Rabbit Semiconductor
• Silicon Family Name: RabbitCore
• Kit Contents: Board
• Features: 10/100 Base-T Ethernet, Serial To Ethernet Bridge
• Development Tool Type: Development Kit
• Rohs Compliant: Yes
• For Use With/related Products: RCM5700
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Contents: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 316-1151

C.1 Introduction
The Prototyping Board included in the Development Kit provides a prototyping area for more
advanced hardware development. The Prototyping Board is shown below in Figure C-1, with its
main features identified.
C.1.1 Prototyping Board Features
•
•
•
•
MiniCore RCM5700/RCM6700 User’s Manual
Power Connection
socket connections.
Power LED
Module Extension Headers
below header J2. Developers can solder wires directly into the appropriate holes, or, for more
flexible development, a 2 × 25 header strip with a 0.1" pitch can be soldered into place. See
Figure C-4 for the header pinouts.
Prototyping Area
hole and surface-mount components. +3.3 V and ground buses run along the left and right
edges of the through-hole prototyping area. The through-hole area is set up to accept compo-
nents with a pitch of 0.1" or widths of 0.3" or 0.6". Several areas for surface-mount devices are
also available. (Note that there are SMT pads on both the top and the bottom of the Prototyping
Board.) Each SMT pad is connected to a hole designed to accept a 30 AWG solid wire.
—The power LED lights whenever power is connected to the Prototyping Board.
—A generous prototyping area is provided for the installation of through-
—Power is supplied to the Prototyping Board via the MiniCore header
—The complete pin set of the MiniCore module is duplicated
Figure C-1. Prototyping Board
rabbit.com
68