MCP9800DM-DL2 Microchip Technology, MCP9800DM-DL2 Datasheet - Page 14

• Manufacturer Part Number: MCP9800DM-DL2
• Description: BOARD DEMO 2 FOR MCP9800
• Manufacturer: Microchip Technology

Specifications of MCP9800DM-DL2

• Sensor Type: Temperature
• Sensing Range: -55°C ~ 125°C
• Interface: I²C, SMBus
• Sensitivity: ±0.5°C
• Voltage - Supply: 2.7 V ~ 5.5 V
• Embedded: Yes, MCU, 8-Bit
• Utilized Ic / Part: MCP9800
• Processor To Be Evaluated: MCP9800, MCP101, PIC10F202, 24LC16B
• Interface Type: I2C
• Lead Free Status / RoHS Status: Not applicable / Not applicable

MCP9800 Temperature Data Logger Demo Board 2 User’s Guide
DS22027A-page 10
5. Insert the MCP9800 Temperature Data Logger Demo Board 2 into to SEEVAL
6. Select Read>Entire Device to read the 24LC16B.
7. Your data (hexadecimal) will be displayed on the SEEVAL
FIGURE 1-3:
2.3.3
Select File>Export>Hex File and store your data to your PC (filename.hex).
2.3.4
1. Open file Temperature Graph.xls (Provided on the CD). Choose enable
2. Press the Import Data button.
3. Find your data file on your PC (filename.hex), Press Open Button.
4. Enter “1” for sample period when asked and press OK. If you have changed the
5. Temperatures both positive and negative will be displayed on the graph. Tabs at
32 evaluation board. To do this, flip the board upside down making sure the ICSP
pins are facing the right side of the SEEVAL
header pins in the rear (right side) of the ZIF socket. Close the socket.
software GUI.
macros if prompted. (May need to adjust security settings here if you are unable
to launch the file.)
sample period in the firmware you will need to adjust the sample period here,
default is approximately 1 sample/sec.
the bottom of the graph will show either °F or °C.
Storing your Data
Displaying Temperature Data
SEEVAL
®
32 Evaluation Tool GUI Window on the PC
®
32 evaluation board. Place the 8
© 2007 Microchip Technology Inc.
®
32 evaluation tool
®