MCP9800DM-DL2 Microchip Technology, MCP9800DM-DL2 Datasheet - Page 13

• Manufacturer Part Number: MCP9800DM-DL2
• Description: BOARD DEMO 2 FOR MCP9800
• Manufacturer: Microchip Technology

Specifications of MCP9800DM-DL2

• Sensor Type: Temperature
• Sensing Range: -55°C ~ 125°C
• Interface: I²C, SMBus
• Sensitivity: ±0.5°C
• Voltage - Supply: 2.7 V ~ 5.5 V
• Embedded: Yes, MCU, 8-Bit
• Utilized Ic / Part: MCP9800
• Processor To Be Evaluated: MCP9800, MCP101, PIC10F202, 24LC16B
• Interface Type: I2C
• Lead Free Status / RoHS Status: Not applicable / Not applicable

© 2007 Microchip Technology Inc.
FIGURE 1-2:
7. Select Device Family>Baseline.
8. Select PIC10F202 from the Device pull-down menu.
9. Select File>Import Hex from the File pull-down menu. A file window will appear.
10. Click on the Write Device Button in the PICkit™ 2 Programmer window. The
11. Disconnect the MCP9800 Temperature Data Logger Demo Board 2 from the
12. LED will flash indicating that measurements are being taken until the 24LC16B
2.3.2
1. Download and install the SEEVAL
2. When the SEEVAL 32 evaluation tool software is started the main window will be
3. Select “I2C” from the Protocol pull-down menu.
4. Select “24AA16/24LC16B” from the Device Name pull-down menu.
Locate, select, and open SEEVALDM-DL.hex from your PC.
PIC10F202 will be written to with the SEEVALDM-DL.hex firmware. Once com-
pleted, the status bar in the middle of the window will indicate Write Successful.
PICkit™ 2 programmer. Remove and replace the Power Header (JP1). Led
should begin flashing indicating that the PIC10F202 is reading temperature from
the MCP9800 and storing the data into the 24LC16B.
has reached its storage limit (2,048 bytes).
SEEVAL
displayed on the PC, as indicated in Figure 1-3.
Reading Data from the MCP9800 Temperature Data Logger
Demo Board 2 board
®
32 Quick Start User’s Guide.
PICkit™ 2 Programmer GUI Window on the PC
Installation and Operation
®
32 evaluation tool software using the
DS22027A-page 9