MCP6SX2DM-PCTLPD Microchip Technology, MCP6SX2DM-PCTLPD Datasheet - Page 19

• Manufacturer Part Number: MCP6SX2DM-PCTLPD
• Description: BOARD DAUGHTER PICTAIL MCP6SX2
• Manufacturer: Microchip Technology
• Series: PICtail™r

Specifications of MCP6SX2DM-PCTLPD

• Sensor Type: Light, Current Output
• Interface: Analog
• Sensitivity: 850nm
• Voltage - Supply: 2.5 V ~ 5.5 V
• Embedded: No
• Utilized Ic / Part: MCP6001, MCP6S22, MCP6S92
• Processor To Be Evaluated: MCP6Sx2
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Sensing Range: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: MCP6SX2DM-PCTLPDR; MCP6SX2DM-PCTLPDR

 2004 Microchip Technology Inc.
3.2.3
The ADC is automatically set up by the PICkit 1 Signal Analysis PC Program. The two
possible inputs are shown in Figure 3-3.
1. If in the Real Time mode of operation (strip chart), select the number of samples
2. Select the sample rate from the second pull-down list.
FIGURE 3-3:
The PICkit 1 Signal Analysis PC Program allows the user to manually configure the
ADC.
1. Clicking the ADC button (see Figure 3-4) opens the ADC configuration window.
See the PIC16F684 data sheet (DS41202) for more information on configuring the
registers.
FIGURE 3-4:
from the first pull-down list.
This window starts at the power-on default conditions for the ADC; therefore, it
must be configured before use.
1. Select Number of Samples
2. Select Sample Rate
Configure the ADC
Standard ADC Options.
Manual ADC Configuration.
2. ADC Window
1. Select ADC window
Operation
DS51514A-page 15