MAX147EVKIT-DIP Maxim Integrated Products, MAX147EVKIT-DIP Datasheet - Page 6

• Manufacturer Part Number: MAX147EVKIT-DIP
• Description: EVAL KIT FOR MAX147
• Manufacturer: Maxim Integrated Products

Specifications of MAX147EVKIT-DIP

• Number Of Adc's: 1
• Number Of Bits: 12
• Sampling Rate (per Second): 133k
• Data Interface: Serial
• Inputs Per Adc: 8 Single Ended
• Input Range: ±VREF/2
• Power (typ) @ Conditions: 2.7mW @ 133kSPS
• Voltage Supply Source: Single Supply
• Operating Temperature: 0°C ~ 70°C
• Utilized Ic / Part: MAX147
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

MAX147 Evaluation System/Evaluation Kit
Table 4. Command-Line Options when Starting MAX147 Software
Table 5. Jumper Settings on MAX147 EV Kit
* If JU2 is open, JU5 must also be open.
6
JUMPER
_______________________________________________________________________________________
JU2*
JU5*
JU1
JU3
JU4
COMMAND
-L filename
VREF vvv
COM vvv
MONO
146
1
2
?
Closed
Open (default)
Closed (default)
Open
Closed (default trace)
Open
Closed (default trace)
Open
Closed (default)
Open
STATE
Defaults to COM1 PC serial port.
Defaults to COM2 PC serial port.
For use with monochrome or LCD display.
Opens file filename for data logging and enables the data-logging commands.
Specifies the actual measured voltage at the VREF pin (nominally 2.5V).
Specifies the voltage at the COM pin.
Lists command-line options.
Enables MAX146-specific program features (FASTPD power-down mode).
Ties SHDN to pin 29 on the µC module.
Forces SHDN to float.
Disable internal reference. VREF is an input.
Enable internal reference. VREF is a 2.5V output (not allowed with MAX147).
Current-sense jumper. The MAX147 draws its +3V supply through this trace.
Do not operate kit with JU3 open.
Switch U3 drives COM.
COM must be driven by an external source.
Drive VREF with external reference.
Use internal reference (not allowed with MAX147).
FUNCTION
FUNCTION