MAX16046EVKIT+ Maxim Integrated Products, MAX16046EVKIT+ Datasheet - Page 9

• Manufacturer Part Number: MAX16046EVKIT+
• Description: IC EE-PROG SYS MGR 12CH 56-TQFN
• Manufacturer: Maxim Integrated Products

Specifications of MAX16046EVKIT+

• Main Purpose: Power Management, Power Supply Supervisor/Tracker/Sequencer
• Utilized Ic / Part: MAX16046, MAX16048
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Secondary Attributes: -
• Embedded: -
• Primary Attributes: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Figure 6. Fault Tab
Figure 7. Advanced Tab
_______________________________________________________________________________________
MAX16046 Evaluation Kit
Observe the contents of the nonvolatile fault registers
using the Fault tab (Figure 6). Each stored channel volt-
age is listed as both a hexadecimal code and as a voltage
(calculated automatically using the input range selection).
The failed line is marked in the Failed column using a
blue dot. If the fault occurred during sequencing, the
Sequencer State row will indicate the power-up or
power-down time slot where the fault occurred. If a
tracking fault occurred on one or more tracking chan-
nels, that is indicated with a blue dot in the Tracker
Fault on Channel row.
Click Clear Fault Registers to reset the contents of the
nonvolatile fault registers. If the lock bits are set, a dia-
log box will allow you to clear them or to cancel the
clear operation.
The Advanced tab (Figure 7) contains the settings for
the programmable outputs as well as several other fea-
tures of the MAX16046: the GPIO configuration, the
RESET and FAULT pin configurations, the DAC outputs,
the watchdog timer, and several miscellaneous timers.
Items changed on this tab are immediately written to
the registers of the part.
Advanced Tab
Fault Tab
9