MAX16046EVKIT+ Maxim Integrated Products, MAX16046EVKIT+ Datasheet - Page 12

• Manufacturer Part Number: MAX16046EVKIT+
• Description: IC EE-PROG SYS MGR 12CH 56-TQFN
• Manufacturer: Maxim Integrated Products

Specifications of MAX16046EVKIT+

• Main Purpose: Power Management, Power Supply Supervisor/Tracker/Sequencer
• Utilized Ic / Part: MAX16046, MAX16048
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Secondary Attributes: -
• Embedded: -
• Primary Attributes: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

MAX16046 Evaluation Kit
Besides the easy-to-use GUI controls, the MAX16046
can also be configured by directly modifying the regis-
ters and EEPROM. The Registers tab, seen in Figure 8,
provides access to the registers and EEPROM. Modify
a register by clicking the field under the Value column,
entering the new value, and hitting enter or clicking in
another field. After being edited, the register in the part
is updated immediately.
Most configuration registers have a matching EEPROM
location that is copied to the register when the
MAX16046 powers up. The Registers tab places each
pair on the same row. After experimenting with a partic-
ular register configuration, that configuration can be
written to the EEPROM by clicking Write Config
Registers to EEPROM.
Figure 8. Registers Tab
12
______________________________________________________________________________________
Registers Tab
Registers in the extended page, including the ADC
conversion results and the fault flags, can be accessed
from the Extended Page Register Description box.
These values are volatile and not saved in EEPROM.
Values stored in the nonvolatile fault EEPROM can be
accessed from the Non-Volatile Fault Register
Description box.
The user EEPROM is also accessible from this tab.
Separate read and write controls are provided. Read
the user EEPROM from the part by clicking Read user
EEPROM. After modifying a value in the User EEPROM
Registers box, download the change to the part by
clicking Write user EEPROM.