MAX9675EVKIT+ Maxim Integrated Products, MAX9675EVKIT+ Datasheet - Page 5

• Manufacturer Part Number: MAX9675EVKIT+
• Description: KIT EVAL FOR MAX9675
• Manufacturer: Maxim Integrated Products

Specifications of MAX9675EVKIT+

• Main Purpose: Interface, Crosspoint Switch/Multiplexer
• Embedded: No
• Utilized Ic / Part: MAX9675
• Primary Attributes: 16 x 16 Video Crosspoint Switch
• Secondary Attributes: Graphical User Interface, USB Interface
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

When the Mode 1 radio button is selected, as shown in
Figure 2, the Individual Output Setting group box
becomes the Output 0 group box, which is used to
configure output channel 0. All other output group
boxes are used to configure their corresponding output
channels. Use the Input Ch drop-down list to select the
input channel for the corresponding output channel.
Check the appropriate Output Enable checkbox to
enable the corresponding output channel. A 1V/V or
2V/V gain can be set using the Gain drop-down list.
After all of the output group boxes are configured,
press the Program button to send the 96-bit SPI
command to the MAX9675. The UPDATE pin of the
MAX9675 will be pulled low to transfer data from the
mode registers to the switch matrix in the MAX9675.
Figure 2. MAX9675 EV Kit Software Main Window (Complete Matrix Mode)
_______________________________________________________________________________________
MAX9675 Evaluation Kit
After the Program button is pressed and the SPI com-
mand is sent to the MAX9675, and if the device
address in the Address drop-down list is correct, the
address recognition output (AOUT) will assert low. In
addition, the AOUT Asserted label in the Address
Recognition group box will appear.
Press the Reset button to pull the RESET pin of the
MAX9675 low to reset the device.
The MAX9675 is a nonblocking 16 x 16 video cross-
point switch with buffered inputs and outputs. The
MAX9675 EV kit has BNC connectors for all of the
inputs and outputs.
Detailed Description of Hardware
5