IS-DEV KIT-7 NKK Switches, IS-DEV KIT-7 Datasheet - Page 18

• Manufacturer Part Number: IS-DEV KIT-7
• Description: KIT DEV FOR OLED SWITCH
• Manufacturer: NKK Switches
• Series: SmartSwitch™r

Specifications of IS-DEV KIT-7

• Main Purpose: Switches with Programmable Display
• Embedded: Yes, ASIC
• Utilized Ic / Part: ISC15ANP4
• Primary Attributes: 2 OLED Switches, PC Board with Flash Memory
• Secondary Attributes: Power and Programming Connections
• Description/function: SMARTSWITCH Development Kit
• For Use With: 360-2431 - SERIAL CBL RJ11-DB9 FOR DEV KIT360-2430 - POWER SUPPLY 240VAC FOR DEV KIT360-2429 - POWER SUPPLY 120VAC FOR DEV KIT
• Lead Free Status / RoHS Status: Not applicable / Not applicable
• For Use With/related Products: Smart Switch - OLED
• Other names: 360-2339

7850 East Gelding Drive • Scottsdale, AZ 85260-3420
Commands to download information directly to OLED modules
Note: Care must be taken using these commands. The OLED modules could get damaged if they are
initialized with a value exceeding the specifications. Please check the OLED modules data sheet and
application notes before using commands.
Command to download data directly to OLED modules
[number] is one byte sent in ASCII HEX format (01H to 80H). This is the number of data bytes (1 to 128
bytes).
[data] is 1 to 128 bytes sent in ASCII HEX format.
The controller sends the [data] to both OLED modules as data.
Command to download a command directly to OLED modules
[number] is one byte sent in ASCII HEX format (01H to 80H). This is the number of data bytes (1 to 128
bytes).
[data] is 1 to 128 bytes sent in ASCII HEX format.
The controller sends the [data] to both OLED modules as a command.
Command to download a command directly to OLED modules (special)
[number] is one byte sent in ASCII HEX format (01H to 80H). This is the number of data bytes (1 to 128
bytes).
[data] is 1 to 128 bytes sent in ASCII HEX format.
The controller turns off the OLED display switches, sends the [data] to both switches as a command and then
turns on the OLED display switches.
CL01 Intelligent Controller Users Manual B.doc
This command downloads data directly from the host to the OLED module.
This command downloads a command from the host to the OLED module.
This command turns off the OLED module, downloads a command from the host to the OLED module,
and turns it back on.
command format: 2FH
transmit format:
command format: 2FH
transmit format:
command format: 2FH
transmit format:
Toll Free 1.877.2BUYNKK (877.228.9655) • Phone [phone] • Fax [phone]
CL01 Intelligent Controller Users Manual
(xxH) (xxH) (xxAH)
(xxH) (xxH) (xxAH)
(xxH) (xxH) (xxAH)
www.nkkswitches.com • Email [e-mail]
53H
47H
49H
[number]
[number]
[number]
(xxAH)
(xxAH)
(xxAH)
[data]
[data]
[data]
Page 18 of 24
0110