IS-DEV KIT-7 NKK Switches, IS-DEV KIT-7 Datasheet - Page 14

• Manufacturer Part Number: IS-DEV KIT-7
• Description: KIT DEV FOR OLED SWITCH
• Manufacturer: NKK Switches
• Series: SmartSwitch™r

Specifications of IS-DEV KIT-7

• Main Purpose: Switches with Programmable Display
• Embedded: Yes, ASIC
• Utilized Ic / Part: ISC15ANP4
• Primary Attributes: 2 OLED Switches, PC Board with Flash Memory
• Secondary Attributes: Power and Programming Connections
• Description/function: SMARTSWITCH Development Kit
• For Use With: 360-2431 - SERIAL CBL RJ11-DB9 FOR DEV KIT360-2430 - POWER SUPPLY 240VAC FOR DEV KIT360-2429 - POWER SUPPLY 120VAC FOR DEV KIT
• Lead Free Status / RoHS Status: Not applicable / Not applicable
• For Use With/related Products: Smart Switch - OLED
• Other names: 360-2339

7850 East Gelding Drive • Scottsdale, AZ 85260-3420
Command to display image on left switch at the requested address
[address] is two bytes with value of 0001H to FFFFH sent as ASCII HEX format.
Example: 2E 31 30303445 displays the image stored at address 004EH.
Command to display image on right switch at the requested address
[address] is two bytes with value of 0001H to FFFFH sent as ASCII HEX format.
Example: 2E 32 30313034 displays the image stored at address 0104H.
Command to increment address on left switch
Example: Start at address 00A1H. Send 2E 33 and the left switch displays the image stored at address 00A2H.
Send 2E 33 again and the left switch displays the image stored at address 00A3H.
Command to increment address on right switch
Example: Start at address 0F09H. Send 2E 34 and the right switch displays the image stored at address
0F0AH. Send 2E 34 again and the right switch displays the image stored at address 0F0BH.
Command to decrement address on left switch
CL01 Intelligent Controller Users Manual B.doc
This command displays an image on left switch at the requested address.
This command displays an image on left switch at the requested address.
This command displays an image on left switch at the address+1.
This command displays an image on right switch at the address+1.
This command displays an image on left switch at the address-1.
command format: 2EH
transmit format:
command format: 2EH
transmit format:
command format: 2EH
transmit format:
command format: 2EH
transmit format:
command format: 2EH
transmit format:
Toll Free 1.877.2BUYNKK (877.228.9655) • Phone [phone] • Fax [phone]
CL01 Intelligent Controller Users Manual
(xxH) (xxH) (xxAH)
(xxH) (xxH) (xxAH)
(xxH) (xxH)
(xxH) (xxH)
(xxH) (xxH)
www.nkkswitches.com • Email [e-mail]
31H
32H
33H
34H
35H
[address]
[address]
Page 14 of 24
0110