ETHERNETDK Silicon Laboratories Inc, ETHERNETDK Datasheet - Page 28

• Manufacturer Part Number: ETHERNETDK
• Description: KIT DEV EMBEDDED ETHERNET
• Manufacturer: Silicon Laboratories Inc
• Type: Controllers & Processorsr

Specifications of ETHERNETDK

• Main Purpose: Interface, Ethernet
• Embedded: Yes, MCU, 8-Bit
• Utilized Ic / Part: C8051F120
• Primary Attributes: CMX-MicroNet TCP/IP Protocol Stack
• Interface Type: RS-232, Ethernet
• Product: Modules
• For Use With/related Products: C8051F120, CP2200
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Secondary Attributes: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 336-1284

Ethernet-DK
6.4.3. Re-Building the Project and Viewing Results
Once the file arrays are updated, it is time to re-build the project and view the results.
6.4.4. Viewing the uWeb Embedded Web Server
The “Hello World” server used in the demo up to this point contains a single static web page. Another example
server included as a HEX file in the Examples\C8051F12x_13x\Ethernet\HTTP\uWeb folder is the “uWeb” server.
This embedded web server contains multiple HTML pages, images, a Java temperature display applet, and CGI
script capabilities allowing the detection and control of an LED state. This server demonstrates some of the
capabilities of the Silicon Laboratories TCP/IP stack. The following instructions can be used to download the
“uWeb” server.
28
1. Open and re-build the project. This can be done by selecting ProjectOpen Project and selecting the
2. If not already connected, click the Connect button in the toolbar or select DebugConnect from the menu.
3. Download the project to the target by clicking the Download Code button
4. Run the server by clicking the Go button in the toolbar, selecting DebugGo from the menu, or pressing the
5. View the embedded web server from a web browser using the same methods learned in stage 1 or stage 2.
6. The updated web page stored inside the MCU should be displayed on the screen as shown in Figure 25.
1. While connected to the C8051F120 Target Board, select DebugDownload Object File from the menu in the
2. Browse to the Examples\C8051F12x_13x\Ethernet\HTTP\uWeb folder. Select the uWeb_F120_3_1.hex and
3. Program the IP address using the method in Section 6.3.3 on page 26.
4. Type in the IP address of the embedded system in a web browser and press Enter. The uWeb server
correct project, then clicking on the Build/Make Project button in the toolbar, selecting ProjectBuild/Make
Project from the menu, or pressing the F7 shortcut key.
Note: If you receive the error message “Communication could not be established with the specified serial
adapter”, open the Connection Options Dialog by selecting OptionsConnection Options from the
menu. Verify that the USB Debug Adapter is selected and that the debug interface is set to JTAG.
shortcut key F5.
Silicon Labs IDE.
click Download. Then press Go.
executing on the MCU should be displayed on the screen as shown in Figure 26.
Figure 25. Embedded Web Server with Modified Content
Rev. 0.6
in the toolbar.