ETHERNETDK Silicon Laboratories Inc, ETHERNETDK Datasheet - Page 16

• Manufacturer Part Number: ETHERNETDK
• Description: KIT DEV EMBEDDED ETHERNET
• Manufacturer: Silicon Laboratories Inc
• Type: Controllers & Processorsr

Specifications of ETHERNETDK

• Main Purpose: Interface, Ethernet
• Embedded: Yes, MCU, 8-Bit
• Utilized Ic / Part: C8051F120
• Primary Attributes: CMX-MicroNet TCP/IP Protocol Stack
• Interface Type: RS-232, Ethernet
• Product: Modules
• For Use With/related Products: C8051F120, CP2200
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Secondary Attributes: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 336-1284

Ethernet-DK
6.2. Stage 2—Basic Web Server with DHCP and Netfinder Capability
In the first stage of the demo, we learned how to generate firmware for an embedded web server using the TCP/IP
Configuration Wizard and access the embedded server from a web browser. In this stage, we will learn how to
generate a web server that uses automatic network configuration (DHCP) to automatically obtain an IP address
from the network. We will also find the embedded web server on the network using the Netfinder utility.
Note: The Netfinder utility v1.0 is not compatible with Windows Vista or Windows 7.
6.2.1. Generating the Embedded Web Server Firmware
We will now use the TCP/IP Configuration Wizard to generate a project with DHCP and Netfinder capability.
16
1. From the Windows Start menu, start the TCP/IP Configuration Wizard. The shortcut will be under the
2. In the Communications Adapter section of the left window, check CP2200.
3. In the Device section of the left window, verify that C8051F12x is selected.
4. In the Protocol Settings section of the left window, make sure Ethernet is selected then check DHCP,
StartSilicon Laboratories menu. Alternatively, the Configuration Wizard can be started by double-clicking
TCPIP_Config.exe located by default in the “C:\SiLabs\MCU\TCP-IP Config” directory.
HTTP, and NETFINDER. The lower level protocols (TCP and UDP) will automatically be enabled as shown in
Figure 12.
Figure 12. TCP/IP Configuration Wizard Protocol Selection
Rev. 0.6