SPUSI2/NOPB National Semiconductor, SPUSI2/NOPB Datasheet - Page 13

• Manufacturer Part Number: SPUSI2/NOPB
• Description: BOARD EVAL DATA CAPTURE BOARD
• Manufacturer: National Semiconductor

Specifications of SPUSI2/NOPB

• Main Purpose: Interface, Data Capture
• Embedded: Yes, MCU, 8-Bit
• Utilized Ic / Part: WEBENCH® Sensor Designer Boards
• Primary Attributes: USB Interface Dongle II
• Secondary Attributes: SPI Interface
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: SPUSI2

corresponding to 15 and 35 degrees, respectively.
5 Menu Selections.
which allow the user to control the software behavior.
5.1 Configuration Panel.
opens the configuration panel shown in the figure below for the currently selected
channel.
Cancel button is selected.
5.1.1 Display Type.
with a depth programmed in the board configuration script.
As an example, assume the user reads the codes 2433 and 2133,
The top of the Sensor Signal Path Control Panel has various menu items
The top left menu selection in the Control Panel is “Configure” which
The Configuration Panel allows the user to define the following properties.
You can choose to select immediate sensor readings or a sliding average
Changes are effective and visible immediately but reverted if the
SensorIn =
m
b
SensorIn = -0.074 x Code + 195.22
= - (35-15) / (2433 - 2163) = -1/35 = -0.074
= 15 – (-1/35) (2433) = 195.22
Figure 5-2: Configuration Panel for selected channel.
m
* code +
Figure 5-1: Menu Selections.
b
Values are