DEMO9S08MP16 Freescale Semiconductor, DEMO9S08MP16 Datasheet - Page 27

• Manufacturer Part Number: DEMO9S08MP16
• Description: BOARD DEMO FOR MC9S08MP16
• Manufacturer: Freescale Semiconductor

Specifications of DEMO9S08MP16

• Main Purpose: Power Management, Motor Control
• Embedded: *
• Utilized Ic / Part: MC9S08MP16
• Primary Attributes: *
• Secondary Attributes: *
• Processor To Be Evaluated: MC9S08MP16
• Interface Type: RS232, USB
• Operating Supply Voltage: 6 V
• Silicon Manufacturer: Freescale
• Core Architecture: HCS08
• Core Sub-architecture: HCS08
• Silicon Core Number: MC9S08
• Silicon Family Name: S08MP
• Kit Contents: Demo Board USB Cable DVD
• Rohs Compliant: Yes
• Tool Type: Demonstration Board
• Cpu Core: HCS08
• Data Bus Width: 8 bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

7.5.2
7.5.3
7.5.4
DEMO9S08MP16 User Manual
Figure 7-5: Jumper Settings for Light Touch Switches KEY_ENABLE (J12)
J12 - Light Touch Switch Enable Jumper KEY_ENABLE
J11 - I/O Signal Slide Switch Voltage Level Setting
J23 - Reset Switch Enable and Reset LED Display Enable Jumper
RESET_EN
The DEMO9S08MP16 has connected an I/O signal (PTE0) to a slide switch
(K2). Jumper J11 is used to select a voltage level of 5V or GND for the switch.
when slide switch K2 is turned on, PTE) will be connected to the voltage level
set by jumper J11. When the slide switch K2 is turned off, PTE0 is not
connected and is floating.
Figure 7-6: I/O Signal Slide Switch Voltage Level Setting (J11)
Figure 7-7: Reset Switch and Reset LED enable Jumper (J23)
Enables the corresponding switch. Each jumper may be individually
installed or removed. By default, all jumpers are installed to enable all
the switches.
Enables the Reset Switch and the Reset LED Display. Each jumper
may be individually installed or removed. This is the default setting.
INPUT_EN (J9)
23