W6810DK Nuvoton Technology Corporation of America, W6810DK Datasheet - Page 10

• Manufacturer Part Number: W6810DK
• Description: KIT DEV/EVAL FOR W6810
• Manufacturer: Nuvoton Technology Corporation of America

Specifications of W6810DK

• Main Purpose: Audio, CODEC
• Embedded: No
• Utilized Ic / Part: W6810
• Primary Attributes: Mono, PCM, 8-Bit
• Secondary Attributes: ADC and DAC Filtering Compliant with ITU G.712
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

The power supply for the analog and digital parts of the W6810 must be 5V +/- 10%. This supply
voltage is connected to the V
ceramic capacitor.
The system has an internal precision voltage reference which generates the 2.5V mid-supply analog
ground voltage. This voltage needs to be decoupled to V
capacitor.
The analog ground reference voltage is available for external reference at the V
needs to be decoupled to V
voltage is generated from the voltage on the V
processing.
The PCM interface is controlled by pins BCLKR, FSR, BCLKT & FST. The input data is received
through the PCMR pin and the output data is transmitted through the PCMT pin. The modes of
operation of the interface are shown in Table 7.3.
7.4. PCM I
7.3. P
7.3.1. Analog and Digital Supply
7.3.2. Analog Ground Reference Bypass
7.3.3. Analog Ground Reference Voltage Outpt
OWER
NTERFACE
BCLKR (Pin 9)
64 kHz to 4.096 MHz
V
V
V
V
SS
SS
DD
DD
M
ANAGEMENT
SS
DD
through a 0.01 μF ceramic capacitor. The analog ground reference
Table 7.3 PCM Interface mode selections
pin. The V
FSR (Pin 7)
8 kHz
V
V
V
V
SS
DD
SS
DD
DD
pin needs to be decoupled to ground through a 0.1 μF
- 10 -
REF
Interface Mode
Long or Short Frame Sync
ISDN GCI with active channel B1
ISDN GCI with active channel B2
ISDN IDL with active channel B1
ISDN IDL with active channel B2
pin and is also used for the internal signal
SS
at the V
REF
pin through a 0.1 μF ceramic
AG
pin. This voltage
W6810