IS-DEV KIT-2 NKK Switches, IS-DEV KIT-2 Datasheet - Page 5

• Manufacturer Part Number: IS-DEV KIT-2
• Description: SMARTSWITCH DEVELOPMENT KIT 2
• Manufacturer: NKK Switches
• Series: SmartSwitch™r

Specifications of IS-DEV KIT-2

• Main Purpose: Switches with Programmable Display
• Utilized Ic / Part: SmartSwitch™LCD Switch
• Primary Attributes: 2 LCD Switches, PC Board with Flash Memory
• Secondary Attributes: Up to 255 Pictures and Attributes
• Description/function: SMARTSWITCH Development Kit
• Architecture: Universal Communicator
• Board Size: 1.752 in x 0.965 in
• Maximum Operating Temperature: + 40 C
• Minimum Operating Temperature: 0 C
• Operating Voltage: 9 V
• Supply Current: 150 mA
• For Use With: 360-2431 - SERIAL CBL RJ11-DB9 FOR DEV KIT360-2430 - POWER SUPPLY 240VAC FOR DEV KIT360-2429 - POWER SUPPLY 120VAC FOR DEV KIT
• Lead Free Status / RoHS Status: Not applicable / Not applicable
• Embedded: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• For Use With/related Products: Smart Switch - LCD Programmble Pushbutton Switches
• Other names: 360-2326

7850 East Gelding Drive • Scottsdale, AZ 85260-3420
Attribute block
IS-Dev Kit-2 Users Manual A.doc
When a switch is pressed the attributes are executed as follows:
When the timer is expired the attributes are executed as follows:
The timer value in second = (TIMER 1)x(TIMER 2)x(0.0369)
TIMER 2 = 0 count as 256.
--- if the value of byte 1 of the attribute is not equal zero , The Legend block and attribute
block from the EEPROM is transferred to internal RAM for switch 1. If the byte 5 of the new
attribute block is equal zero then the timer is turned off. If the value of byte 5 is not equal zero
then the value of byte 5 is put in TIMER 1 and value of byte six is put in TIMER 2 and timer is
turned on.
--- if the value of byte 2 of the attribute is not equal zero , The Legend block and attribute
block from the EEPROM is transferred to internal RAM for switch 2.
--- if the value of byte 3 of the attribute is not equal zero , The Legend block and attribute
block from the EEPROM is transferred to internal RAM for switch 1. If the byte 5 of the new
attribute block is equal zero then the timer is turned off. If the value of byte 5 is not equal zero
then the value of byte 5 is put in TIMER 1 and value of byte 6 is put in TIMER 2 and timer is
turned on.
--- if the value of byte 4 of the attribute is not equal zero , The Legend block and attribute
block from the EEPROM is transferred to internal RAM for switch 2.
Toll Free 1.877.2BUYNKK (877.228.9655) • Phone [phone] • Fax [phone]
A block of 6 bytes.
Byte
www.nkkswitches.com • Email [e-mail]
1
2
3
4
5
6
IS-Dev Kit-2 Users Manual
Pointer for LCD Module #1 when
switch is pressed.
Pointer for LCD Module #2
when switch is pressed
Pointer for LCD Module #1 when
the timer is expired.
Pointer for LCD Module #2 when
the timer is expired.
Value for TIMER 1
Value for TIMER 2
Description
Page 5 of 15
0110