ST7MDT20-TEB/DVP STMicroelectronics, ST7MDT20-TEB/DVP Datasheet - Page 15

• Manufacturer Part Number: ST7MDT20-TEB/DVP
• Description: BOARD TARGET EMULATION ST7-DVP
• Manufacturer: STMicroelectronics

Specifications of ST7MDT20-TEB/DVP

• Accessory Type: Target Board
• For Use With/related Products: ST7MDT20-DVP3 Emulator
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

ST7MDT20-DVP3 Probe User Guide
3.2
TQFP80 (14 x 14) package
To connect the ST7MDT20-DVP3 to your application board when your target ST7
microcontroller is in the TQFP80 package, you will need the ST7MDT20-DVP3
with the ST7MDT20-T80/DVP adapter kit.
1 Ensure that the emulator and application board are powered off.
2 Connect one end of each of the three 50-pin flat cables to connectors J1, J2 and
3 Connect the other end of each of the three 50-pin flat cables to the TQFP80/64/
4 Solder the TQFP80 (14 x 14) Yamaichi socket onto your application board.
5 Fix the device adapter (ref.: DB531) to the Yamaichi socket that is soldered on
6 Connect the adapter to the device adapter as shown in
Refer to your ST7-DVP3 Emulator User Manual for information about connecting
your emulator to your PC.
J3 on the ST7MDT20-DVP3 TEB.
44 adapter (ref.: DB530), as shown in
your application board, using the provided screws (see
the device adapter’s pin 1 indicator is aligned with the socket’s pin 1 indicator.
Flat cables
Adapter
Device adapter
Socket
Figure 8: Connection for TQFP80
Figure 8
3 - Connecting to your application board
.
Figure 8
Figure 8
Pin 1 indicators
.
). Ensure that
15/38