101-0394 Rabbit Semiconductor, 101-0394 Datasheet - Page 51

• Manufacturer Part Number: 101-0394
• Description: CARD D/A +/-10V SR9410 SMARTSTAR
• Manufacturer: Rabbit Semiconductor

Specifications of 101-0394

• Accessory Type: Smart Star D/A Card
• For Use With/related Products: SR9410
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

5.1 Ethernet Connections
Before proceeding you will need to have the following items.
• If you don’t have an Ethernet connection, you will need to install a 10Base-T Ethernet
• Two RJ-45 straight-through Ethernet cables and a hub, or an RJ-45 crossover Ethernet
The Ethernet cables and Ethernet hub are available from Rabbit in a TCP/IP tool kit. More
information is available at www.rabbit.com.
1. Install the CPU Card on the backplane, and connect the power supply and the
2. Ethernet Connections
• If you do not have access to an Ethernet network, use a crossover Ethernet cable to con-
• If you have an Ethernet connection, use a straight-through Ethernet cable to establish
User’s Manual
card (available from your favorite computer supplier) in your PC.
cable.
programming cable as shown in Chapter 2, “Getting Started.”
nect the installed CPU Card to a PC that at least has a 10Base-T Ethernet card.
an Ethernet connection to the installed CPU Card from an Ethernet hub. These connec-
tions are shown in Figure 18.
Chapter 5 discusses using the TCP/IP features on the CPU cards.
Note that the TCP/IP feature is available only on the SR9150
CPU Card.
User’s PC
(network of 2 computers)
Ethernet
crossover
cable
Direct Connection
5. U
CPU Card
SR9150
Figure 18. Ethernet Connections
SING THE
Ethernet
cables
Direct Connection Using a Hub
Hub
TCP/IP F
CPU Card
SR9150
EATURES
To additional
network
elements
51