AC244006 Microchip Technology, AC244006 Datasheet - Page 52

• Manufacturer Part Number: AC244006
• Description: KIT MPLAB REAL ICE TRACE
• Manufacturer: Microchip Technology

Specifications of AC244006

• Accessory Type: Interface Board
• Features: Instruction Trace Capability, Polarized Interface
• For Use With: PIC32MX Plug-in Modules
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With/related Products: PIC32
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

7.8
7.9
DS51616A-page 48
OTHER EMULATOR BOARDS (FUTURE)
TARGET BOARD
®
Additional boards that will be available soon for use with the emulator system are:
• Header Board
• Self-Test Board
• High-Speed to Standard Converter Board
7.8.1
To use an ICE device (Device-ICE), a header board is required. Simply plug the
communication connector(s) into the header board and then connect the header to the
target board either directly or through a transition socket.
For more on available header boards, see the “Header Board Specification”
(DS51292).
7.8.2
This board can be used to verify that the emulator is functioning properly. To use this
board:
1. Disconnect the emulator from the target and the PC.
2. Insert the standard driver board if it is not already installed.
3. Connect the self-test board to the emulator using the modular cable.
4. Connect the emulator to the PC.
5. Select the MPLAB REAL ICE in-circuit emulator as either a debugger or
6. MPLAB IDE will automatically detect and run the complete self test and give you
7.8.3
This board is a combined high-speed receiver board and standard conversion board.
The board allows high-speed communication to be used with a target that has a
standard connector.
Plug the high-speed connectors into one end of the board and the standard connector
into the other end. This is useful for connecting to a target board with a standard
connector which is a large distance away from the emulator, thus calling for LVDS
communication.
The target board should be powered according to the requirements of the selected
device (1.6V-5.5V) and the application.
Depending on the type of emulator-to-target communications used, there will be some
considerations for target board circuitry:
• Section 2.5.3 “Target Connection Circuitry”
• Section 2.5.4 “Circuits That Will Prevent the Emulator From Functioning”
Note:
programmer in MPLAB IDE.
a status (pass/fail). Instructions on what to do will follow.
Header Board
Self-Test Board
High-Speed to Standard Converter Board
The emulator cannot power the target.
™
© 2006 Microchip Technology Inc.