AC244006 Microchip Technology, AC244006 Datasheet - Page 17

• Manufacturer Part Number: AC244006
• Description: KIT MPLAB REAL ICE TRACE
• Manufacturer: Microchip Technology

Specifications of AC244006

• Accessory Type: Interface Board
• Features: Instruction Trace Capability, Polarized Interface
• For Use With: PIC32MX Plug-in Modules
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With/related Products: PIC32
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

2.5
© 2006 Microchip Technology Inc.
COMMUNICATION CONNECTIONS
2.4.3
The emulator system can be configured to use high speed to standard communication
via a converter. If you need to use high-speed to facilitate emulator/target
communication over a large distance, but do not need the additional debug features,
then this configuration can be useful.
To configure the system for this type of communication, plug the high-speed driver
board into the emulator and then attach the modular cables. Plug these cables into the
sockets on the converter board. Plug one end of the standard cable into the socket on
the converter board. Plug the other end of the standard cable into either the target
board or header board, as shown in Section 2.4.1 “Standard Communication”.
There are two driver boards available to closely match most application requirements.
The standard driver board (MPLAB ICD 2 compatible) can be used to connect to the
myriad of demo boards and applications that contain the RJ11 connector. The
high-speed driver/receiver board combination can be used for high-speed applications,
for additional trace features, for large (several feet) emulator-to-target distances and for
noisy environments.
2.5.1
Using the standard driver board, the MPLAB REAL ICE in-circuit emulator is connected
to the target device with the modular interface (six-conductor) cable. The pin
numbering for the connector is shown from the bottom of the target PC board in
Figure 2-6.
FIGURE 2-6:
Note:
Hybrid Communication (Future)
Standard Communications Target Connection
Cable connections at the emulator and target are mirror images of each
other, i.e., pin 1 on one end of the cable is connected to pin 1 on the other
end of the cable.
STANDARD CONNECTION AT TARGET
V
PP
V
DD
/MCLR
1
2
3
4
5
V
6
SS
PGD
PGC
Bottom of
Target Board
DS51616A-page 13