LS100-15 TDK Corporation, LS100-15 Datasheet - Page 13
![POWER SUPPLY 15V 7A SGL OUTPUT](/photos/8/85/88546/ls100-15_sml.jpg)
LS100-15
Manufacturer Part Number
LS100-15
Description
POWER SUPPLY 15V 7A SGL OUTPUT
Manufacturer
TDK Corporation
Series
LSr
Type
Industrialr
Datasheets
1.LS25-12.pdf
(2 pages)
2.LS50-12.pdf
(13 pages)
3.LS100-24.pdf
(1 pages)
4.LS100-24.pdf
(3 pages)
Specifications of LS100-15
Number Of Outputs
1
Voltage - Output
15V
Power (watts)
100W
Applications
Commercial
Power Supply Type
Switching (Closed Frame)
Voltage - Input
88 ~ 264VAC
Mounting Type
Chassis Mount
1st Output
15 VDC @ 7A
Size / Dimension
6.3" L x 3.8" W x 1.5" H (160mm x 96.5mm x 38.1mm)
Power (watts) - Rated
105W
Operating Temperature
-25°C ~ 70°C
Efficiency
84%
Approvals
CE, EN, IEC, UL
Output Current (max)
7A
Output Voltage
15V
Input Frequency
47 to 63Hz
Screening Level
Commercial
Product Height (mm)
38.1mm
Operating Temperature Min Deg. C
-25C
Operating Temperature Max Deg. C
70C
Mounting Style
Chassis
Pin Count
5
Brand/series
LS Series
Configuration
Enclosed
Current, Output
7.0
Frequency, Input
47-63 Hz
Height
1.5 Inch
Length
6.3 Inch
Line Regulation
60 mV
Load Regulation
120 mV
Operation
Switching
Output
15 VDC @ 7 A
Power Rating
105 Watts
Power, Output
105 W
Primary Type
AC-DC
Ripple, Rejection
120 mV
Temperature, Operating
–25 to 70 degree C
Temperature, Storage
–40 to 85 degree C
Voltage, Adjustment Range
13.50-16.50
Voltage, Input
88 to 264/125 to 373 VAC/VDC
Voltage, Output
15 VDC
Weight
21.5 Ozs.
Width
3.8 Inch
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
3rd Output
-
2nd Output
-
4th Output
-
Lead Free Status / Rohs Status
RoHS Compliant part
Other names
285-1805
LS10015
LS10015
Available stocks
Company
Part Number
Manufacturer
Quantity
Price
Company:
Part Number:
LS100-15
Manufacturer:
TDK-LAMBDA
Quantity:
617
7. External Fuse Rating
8. Before concluding that the unit is at fault, make the following checks.
MODEL
LS25
LS35~LS50
LS75~LS150
NOTE : It is normal to hear audible noise from power-supply under Dynamic Load operation or if the input voltage
waveform is not sinusoidal.
9. Warranty Condition
Warranty applies but not limited to the following.
Following cases are not covered by warranty.
Refer to the following fuse rating when selecting the external input fuse. Surge current flows when input turns on.
Fuse rating is specified by Inrush Current value at input turn on. Do not select the fuse according to input current (rms)
values under the actual load condition.
This product is under warranty for 3 years (based on 8 hours/day operation) from the date of shipment. During the
warranty period, TDK-Lambda will, at it’s option, either repair or replace products prove to be defective.
Check if the rated input voltage is connected.
Check if the wiring of input and output is correct.
Check if the wire size is correct.
Check if the output voltage trimmer (V.ADJ) is properly adjusted.
Check if the output current and output wattage does not exceed the specification.
Ensure that a large capacitor is not connected across the output terminals. Please use within maximum capacitance
shown below.
LS25
LS35, LS50
LS75
LS100
LS150
(1) Average operating temperature (ambient temperature of the power supply unit) is under 40
(2) Average load factor is 80% or less.
(3) Installation method : Standard installation.
(1) Improper usage and mis-handling like dropping or applying shock to the unit and defects from operation
(2) Defects resulting from natural disaster (fire, flood).
(3) Unauthorized modification or repair.
exceeding specification of the product.
3.3V
:
:
:
:
:
10,000uF
10,000uF
F1.6A , 250V
T2A , 250V
T2.5A , 250V
F4A , 250V
F5A , 250V
5V
10,000uF
5,000uF
12V
Maximum external capacitance
5,000uF
12
2,000uF
15V
1,000uF
2,000uF
5,000uF
24V
LS
INSTRUCTION MANUAL
TDK-Lambda
25-150
36V
o
1,000uF
Series
C.
500uF
500uF
48V