HWS30-5/A TDK Corporation, HWS30-5/A Datasheet - Page 3

• Manufacturer Part Number: HWS30-5/A
• Description: PWR SUP IND 5V 6A SNG OUTPUT
• Manufacturer: TDK Corporation
• Series: HWSr
• Type: Enclosedr

Specifications of HWS30-5/A

• Number Of Outputs: 1
• Efficiency: 80%
• Voltage - Output: 5V
• Power (watts): 30W
• Applications: Commercial
• Power Supply Type: Switching (Closed Frame)
• Voltage - Input: 85 ~ 265VAC
• Mounting Type: Chassis Mount
• 1st Output: 5 VDC @ 6A
• Size / Dimension: 3.74" L x 1.24" W x 3.23" H (95mm x 31.5mm x 82mm)
• Power (watts) - Rated: 30W
• Operating Temperature: -10°C ~ 70°C
• Approvals: CE, CSA, EN, IEC, UL
• Output Current (max): 6A
• Input Voltage: 85 to 265V
• Output Voltage: 5V
• Output Power (max): 30W
• Input Frequency: 47 to 63Hz
• Screening Level: Commercial
• Operating Temperature Min Deg. C: -10C
• Operating Temperature Max Deg. C: 70C
• Mounting Style: Chassis
• Pin Count: 5
• Application: Process control, NC-machining, automotive, packaging equipment, materials handling, chemical processing, robots, burn-in and test, automated test, instrumentation, detection and measurement
• Brand/series: HWS Series
• Configuration: Enclosed
• Current, Rating: 6 A (Max.)
• Load Regulation: 40 mV
• Operation: Switching
• Output: 5 VDC @ 6 A
• Power, Output: 30 W
• Primary Type: AC-DC
• Regulation, Line: 20 mV
• Special Features: PFC
• Standards: Approved to UL, CSA Certified
• Temperature Coefficient: 0.02%⁄°C (Max.)
• Temperature, Operating: -10 to +70 °C
• Voltage, Input: 85 to 265/120 to 370 VAC/VDC
• Voltage, Output: 5 VDC
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• 3rd Output: -
• 2nd Output: -
• 4th Output: -
• Lead Free Status / Rohs Status: RoHS Compliant part
• Other names: 285-1340; HWS305/A

*10. Measured by the each measuring method of UL,CSA,EN and DENAN(at 60Hz).
*11. Ratings - Derating at standard mounting.
*12. As for DENAN, designed to meet at 100VAC.
*1. At 100/200VAC, Ta=25°C and maximum output power.
*2. For cases where conformance to various safety specs (UL, CSA, EN) are required,
*3. Not applicable for the in-rush current to Noise Filter for less than 0.2ms.
*4. Measure with JEITA RC-9131A probe, Bandwidth of scope :100MHz.
*5. 85 - 265VAC , constant load.
*6. No load-Full load, constant input voltage.
*7. Foldback current limit with automatic recovery. Not operate at over load or dead short condition for more than 30seconds.
*8. OVP circuit will shutdown output, manual reset (Re power on).
*9. At 100/200VAC , Ta=25°C, nominal output voltage and maximum output current.
*Read instruction manual carefully, before using the power supply unit.
10 Maximum Ripple & Noise
11 Maximum Line Regulation
12 Maximum Load Regulation
13 Temperature Coefficient
14 Over Current Protection
15 Over Voltage Protection
16 Hold-up Time (Typ)
17 Leakage Current
18 Remote Sensing
19 Parallel Operation
20 Series Operation
21 Operating Temperature
22 Operating Humidity
23 Storage Temperature
24 Storage Humidity
25 Cooling
26 Withstand Voltage
27 Isolation Resistance
28 Vibration
29 Shock (In package)
30 Safety
31 Line DIP
32 Conducted Emission
33 Radiated Emission
34 Immunity
35 Weight(Typ.)
36 Size (W x H x D)
1 Nominal Output Voltage
2 Maximum Output Current
3 Maximum Output Power
4 Efficiency (Typ)
5 Input Voltage Range
6 Input Current (100/200VAC)(Typ) (*1) -
7 Inrush Current(Typ)
8 PFHC
9 Output Voltage Range
ITEMS
to be described as 100 - 240VAC(50/60Hz).
For start up at low ambient temperature and low input voltage, output ripple noise might not meet specification.
However, there is no overshoot at start up and output ripple noise specification can be met after one second.
A225-01-03/A
=NOTES=
HWS30/A
- Load (%) is percent of maximum output power or maximum output current, whichever is greater.
- As for other mountings, refer to derating curve (A225-01-02/A-_ ).
(*4)
(*1) 100VAC
MODEL
-10<Ta< 0°C
0<Ta<60°C
200VAC
(*10) -
(*11) -
(*12) -
(*2) -
(*3) -
(*5) -
(*6) -
(*7) -
(*8) -
(*9) -
mm
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
SPECIFICATIONS
Less than 0.5mA. 0.2mA(Typ) at 100VAC / 0.4mA(Typ) at 230VAC
Designed to meet IEC61000-4-2(Level 2,3), -3(Level 3), -4(Level 3),
Designed to meet UL60950-1, CSA60950-1, EN60950-1, EN50178,
More than 100M
Input - FG : 2kVAC (20mA), Input - Output : 3kVAC (20mA)
-10 to +60°C (-10 to +40°C:100%,+50°C:60%,+60°C:20%)
Designed to meet EN55011/EN55022-B, FCC-B, VCCI-B
Designed to meet EN55011/EN55022-B, FCC-B, VCCI-B
14A at 100VAC, 28A at 200VAC, Ta=25°C, Cold Start
Designed to meet SEMI-F47 (200VAC Line only)
At no operating, 10 - 55Hz (Sweep for 1min)
85 - 265VAC (47 - 63Hz) or 120 - 370VDC
31.5 x 82 x 95 ( Refer to Outline Drawing )
-5(Level 3,4), -6(Level 3), -8(Level 4), -11
Output - FG : 500VAC (100mA) for 1min
19.6m/s
Designed to meet IEC61000-3-2
30 to 90%RH (No dewdrop)
10 to 95%RH (No dewdrop)
at 25°C and 70%RH Output - FG : 500VDC
2
Less than 0.02% / °C
Less than 196.1m/s
Convection Cooling
Constant, X,Y,Z 1hour each.
UL508, DENAN
11.25V-13.05V
-30 to +85°C
HWS30-9/A
7.2V-10.8V
0.8A/0.4A
3.57A <
150mV
180mV
Possible
30.6W
36mV
72mV
20ms
3.4A
260g
78%
81%
9V
-
-
2