AXA005A0X Lineage Power, AXA005A0X Datasheet - Page 11

• Manufacturer Part Number: AXA005A0X
• Description: CONVERT DC/DC 0.75 5.5V @ 5A SIP
• Manufacturer: Lineage Power
• Series: Austin MicroLynx™r
• Type: Point of Load (POL) Non-Isolated with Remote On/Offr

Specifications of AXA005A0X

• Rohs Status: RoHS non-compliant
• Output: 0.75 ~ 5.5V
• Number Of Outputs: 1
• Power (watts): 27W
• Mounting Type: Through Hole
• Voltage - Input: 10 ~ 14V
• Package / Case: 5-SIP Module
• 1st Output: 0.75 ~ 5.5 VDC @ 5A
• Size / Dimension: 0.90" L x 0.26" W x 0.40" H (22.9mm x 6.6mm x 10.2mm)
• Power (watts) - Rated: 27.5W
• Operating Temperature: -40°C ~ 85°C
• Efficiency: 89%
• Approvals: CSA, EN, UL, VDE
• Product: Non-Isolated / POL
• 3rd Output: -
• 2nd Output: -
• Lead Free Status / Rohs Status: No RoHS Version Available
• Other names: 555-1009

Data Sheet
October 1, 2009
Design Considerations
Output Filtering
The Austin MicroLynx
for low output ripple voltage and will meet the
maximum output ripple specification with 1 µF
ceramic and 10 µF polymer capacitors at the output of
the module. However, additional output filtering may
be required by the system designer for a number of
reasons. First, there may be a need to further reduce
the output ripple and noise of the module. Second,
the dynamic response characteristics may need to be
customized to a particular load step change.
To reduce the output ripple and improve the dynamic
response to a step load change, additional
capacitance at the output can be used. Low ESR
polymer and ceramic capacitors are recommended to
improve the dynamic response of the module. For
stable operation of the module, limit the capacitance
to less than the maximum output capacitance as
specified in the electrical specification table.
LINEAGE
POWER
TM
12V SIP module is designed
(continued)
10 – 14Vdc input; 0.75Vdc to 5.5Vdc Output; 5A output current
Austin MicroLynx
Safety Considerations
For safety agency approval the power module must
be installed in compliance with the spacing and
separation requirements of the end-use safety agency
standards, i.e., UL 60950-1, CSA C22.2 No. 60950-1-
03, and VDE 0850:2001-12 (EN60950-1) Licensed.
For the converter output to be considered meeting the
requirements of safety extra-low voltage (SELV), the
input must meet SELV requirements. The power
module has extra-low voltage (ELV) outputs when all
inputs are ELV.
The input to these units is to be provided with a fast-
acting fuse with a maximum rating of 6A in the
positive input lead
TM
12V SIP Non-isolated Power Modules:
.
11