RPP50-2405S Recom Power Inc, RPP50-2405S Datasheet - Page 3

• Manufacturer Part Number: RPP50-2405S
• Description: CONV DC/DC 50W SNGL 5V OUT
• Manufacturer: Recom Power Inc
• Series: Powerline RPP50r
• Type: Isolatedr

Specifications of RPP50-2405S

• Output: 5V
• Number Of Outputs: 1
• Power (watts): 50W
• Mounting Type: Through Hole
• Voltage - Input: 18 ~ 36V
• Package / Case: 6-DIP Module
• 1st Output: 5 VDC @ 10A
• Size / Dimension: 2.00" L x 1.20" W x 0.46" H (50.8mm x 30.5mm x 11.7mm)
• Power (watts) - Rated: 50W
• Operating Temperature: -45°C ~ 74°C
• Efficiency: 90%
• Product: Isolated
• Output Power: 50 W
• Input Voltage Range: 18 V to 36 V
• Input Voltage (nominal): 24 V
• Output Voltage (channel 1): 5 V
• Output Current (channel 1): 10 A
• Isolation Voltage: 3 KV
• Package / Case Size: 50.8 mm x 30.5 mm x 11.7 mm
• Output Voltage: 5 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• 3rd Output: -
• 2nd Output: -
• 4th Output: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 30020007; 945-1304

1. Typical values at nominal input voltage and no load/full load.
2. Typical values at nominal input voltage and full load.
3. Typical values for ribbed case at nominal input voltage and full load in vertical orientation and with Eurocard-sized PCB ground planes to assist in heat
dissipation. For horizontal orientation, reduce the maximum temperatures by 10°C.
4. The ON/OFF pin voltage is referenced to negative input. The pin is pulled high internally.
5. Requires an external 100µF/100V low ESR capacitor to meet EN61000-4-4 and EN61000-4-5
6. Case l: 50% Stress, Temperature at 50°C (Ground Benign).
7. To ensure a good all-round electrical contact, the baseplate is pressed firmly into place within the aluminium housing.The hydraulic press can leave
tooling marks and deformations to both the housing and baseplate. The case is anodised aluminium, so there will be natural variations in the case
colour and the aluminium is not scratch resistant. Any resultant marks, scratches and colour varations are cosmetic only and do not affect the
operation or performance of the converters.
Safety Standards
Thermal Cycling
Vibration
Conducted Emissions
Radiated Emissions
ESD
Radiated Immunity
Fast Transient
Surge
Conducted Immunity
MTBF calculated according to BELLCORE TR-NWT-000332
www.recom-international.com
POWERLINE+
DC/DC-Converter
Notes :
Specifications
ON/OFF control is standard with positive logic: e.g. RPP40-2405SW, RPP50-4805S-B.
Add “1” before the suffix for negative logic: e.g. RPP40-2405SW-1, RPP50-4805S-1B.
Positive logic: 0= OFF, 1 = ON. The converter will be ON if the CTRL is left open.
Negative logic: 1 = OFF, 0 = ON. The converter will be OFF if the CTRL is left open.
(5)
External Output Trimming
Refer to Application Notes for
(5)
suggested Resistor Values
(typical at nominal input and 25°C unless otherwise noted)
(6)
REV: 0/2011
EN55022
EN55022
EN61000-4-2
EN61000-4-3
EN61000-4-4
EN61000-4-5
EN61000-4-6
W
W
10-55Hz, 12G, 30 Min. along X, Y and Z
RPP50-S
Series
certified UL-60950-1, 1st Edition
complies with MIL-STD-810F
1989 x 10
Perf. Criteria B
Perf. Criteria B
Perf. Criteria B
Perf. Criteria A
Perf. Criteria A
W
PP-39
Class B
Class B
3
hours