LT M673-N2Q1-25-Z OSRAM Opto Semiconductors Inc, LT M673-N2Q1-25-Z Datasheet - Page 18

• Manufacturer Part Number: LT M673-N2Q1-25-Z
• Description: LED TOPLED 532NM TRUE GREEN SMD
• Manufacturer: OSRAM Opto Semiconductors Inc
• Series: TOPLEDr

Specifications of LT M673-N2Q1-25-Z

• Color: Green
• Luminous Flux @ Current - Test: 190 mlm
• Millicandela Rating: 62.75mcd
• Current - Test: 10mA
• Wavelength - Dominant: 529nm
• Wavelength - Peak: 527nm
• Voltage - Forward (vf) Typ: 3V
• Lens Type: Clear
• Lens Style/size: Rectangle, 1.5mm x 1mm
• Package / Case: 0805 (2012 Metric)
• Size / Dimension: 2.00mm L x 1.40mm W
• Height: 1.30mm
• Viewing Angle: 120°
• Mounting Type: Surface Mount
• Resistance Tolerance: 529nm
• Mounting Style: SMD/SMT
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: Q65110A5929

Remarks:
1)
2)
3)
4)
5)
6)
7)
8)
9)
10)
11)
2008-03-05
Brightness groups are tested at a current pulse duration of 25 ms and a tolerance of ± 11%.
Due to the special conditions of the manufacturing processes of LED, the typical data or calculated correlations of
technical parameters can only reflect statistical figures. These do not necessarily correspond to the actual
parameters of each single product, which could differ from the typical data and calculated correlations or the typical
characteristic line. If requested, e.g. because of technical improvements, these typ. data will be changed without any
further notice.
Driving the LED in reverse direction is suitable for short term application.
R
Wavelengths are tested at a current pulse duration of 25 ms and a tolerance of ±1 nm.
Forward voltages are tested at a current pulse duration of 1 ms and a tolerance of ±0.05 V.
In the range where the line of the graph is broken, you must expect higher brightness differences between single
LEDs within one packing unit.
Dimensions are specified as follows: mm (inch)
Package able to withstand TTW-soldering heat
A critical component is a component used in a life-support device or system whose failure can reasonably be
expected to cause the failure of that life-support device or system, or to affect its safety or the effectiveness of that
device or system.
Life support devices or systems are intended
(a) to be implanted in the human body,
or
(b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health and the
life of the user may be endangered.
thJA
results from mounting on PC board FR 4 (pad size ≥ 5 mm
18
2
per pad)
LB M673, LT M673