HSMF-C113 Avago Technologies US Inc., HSMF-C113 Datasheet - Page 8

• Manufacturer Part Number: HSMF-C113
• Description: LED CHIP RGB 2.5X1.0X1.0MM SMD
• Manufacturer: Avago Technologies US Inc.
• Type: Tri-Colorr

Specifications of HSMF-C113

• Viewing Angle: 120° Red, 125° Green, 125° Blue
• Package / Case: 4-SMD, No Leads
• Mounting Type: Surface Mount, Right Angle
• Color: Red, Green, Blue (RGB)
• Lens Style/size: Rectangle, 2.1mm x 1mm
• Voltage - Forward (vf) Typ: 1.9V Red, 2.0V Green, 3.4V Blue
• Millicandela Rating: 80mcd Red, 50mcd Green, 60mcd Blue
• Luminous Flux @ Current - Test: 251 mlm Red, 169 mlm Green, 203 mlm Blue
• Current - Test: 20mA
• Lens Type: Diffused
• Wavelength - Peak: 637nm, 570nm, 468nm
• Resistance Tolerance: 626nm, 572nm, 470nm
• Led Size: 2.5 mm x 1 mm
• Illumination Color: Red, Green, Blue
• Lens Color/style: Diffused
• Operating Voltage: 1.9 V, 2 V, 3.4 V
• Wavelength: 626 nm, 572 nm, 470 nm
• Luminous Intensity: 80 mcd, 50 mcd, 60 mcd
• Mounting Style: SMD/SMT
• Operating Current: 20 mA
• Lens Dimensions: 2.1 mm x 1 mm
• Lens Shape: Rectangular
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 40 C
• Peak Wavelength: 637 nm, 670 nm, 468 nm
• Package Type: Chip Led
• Emitting Color: Blue/Yellow Green/Red
• Test Current (it): 20mA
• Forward Current: 20mA
• Dominant Wave Length: 470/572/626nm
• Forward Voltage: 3.9/2.6/2V
• Product Length (mm): 2.5mm
• Product Height (mm): 1mm
• Product Depth (mm): 1mm
• Mounting: Surface Mount
• Shape Type: Rectangular
• Chip Material: InGaN/AlGaInP/AlGaInP
• Main Category: Chip LED
• Number Of Elements: 3
• Pin Count: 4
• Operating Temperature Classification: Industrial
• Operating Temp Range: -40C to 85C
• Reverse Voltage: 5V
• Power Dissipation: 59/39/36mW
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

Figure 12. Tape leader and trailer dimensions.
Reflow Soldering:
For more information on reflow soldering, refer to Application Note AN-1060, Surface Mounting SMT LED Indicator
Components.
Storage Condition:
Baking is required before mounting, if:
1. Humidity Indicator Card is > 10% when read at 23 ± 5°C.
2. Device expose to factory conditions <30°C/60%RH more than 672 hours.
Recommended baking condition:
For product information and a complete list of distributors, please go to our web site:
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries.
Data subject to change. Copyright © 2005-2010 Avago Technologies. All rights reserved. Obsoletes 5989-4813EN
AV02-0611EN - April 9, 2010
END
THERE SHALL BE A
MINIMUM OF 160 mm
(6.3 INCH) OF EMPTY
COMPONENT POCKETS
SEALED WITH COVER
TAPE.
5 to 30°C @ 60%RH max.
MOUNTED WITH
COMPONENTS
60±5°C for 20 hours.
THERE SHALL BE A
MINIMUM OF 160 mm
(6.3 INCH) OF EMPTY
COMPONENT POCKETS
SEALED WITH COVER
TAPE.
START
www.avagotech.com
MINIMUM OF
230 mm
(9.05 INCH)
MAY CONSIST
OF CARRIER
AND/OR
COVER TAPE.