HFCT-711XPD Avago Technologies US Inc., HFCT-711XPD Datasheet - Page 13

• Manufacturer Part Number: HFCT-711XPD
• Description: TXRX SMF XFP 10BGE 2KM OC-192
• Manufacturer: Avago Technologies US Inc.

Specifications of HFCT-711XPD

• Data Rate: 10.52Gbps
• Wavelength: 1310nm
• Applications: General Purpose
• Voltage - Supply: 3.135 V ~ 3.465 V
• Connector Type: LC Duplex
• Mounting Type: Panel Mount
• Function: Transceiver for Multirate SONET OC-192 SR1, 10G Base-LR and 10G FC
• Product: Transceiver
• Maximum Rise Time: 24 ps
• Maximum Fall Time: 24 ps
• Operating Supply Voltage: 3.135 V to 3.465 V
• Maximum Operating Temperature: + 70 C
• Minimum Operating Temperature: - 5 C
• Package / Case: XFP-30
• For Use With: Singlemode Glass
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Application Support
An Evaluation Kit and Reference Designs are available to
assist in evaluation of the HFCT-711XPD. Please contact
your local Field Sales representative for availability and
ordering details.
Regulatory Compliance
The transceiver Regulatory Compliance performance is
provided in Table 2 as a figure of merit to assist the
designer. The overall equipment design will determine
the certification level.
Electrostatic Discharge (ESD)
There are two conditions in which immunity to ESD
damage is important. Table 13 documents the ESD
immunity to both of these conditions.
The first condition is static discharge to the transceiver
during handling such as when the transceiver is inserted
into the transceiver port. To protect the transceiver, it is
important to use normal ESD handling precautions
including the use of grounded wrist straps, work benches,
and floor mats in ESD controlled areas. The ESD sensitivity
Table 2. Regulatory Compliance
13
Feature
Electrostatic Discharge (ESD) to the
exterior of the XFP module
Electrostatic Discharge (ESD) to the
Optical Connector
Electrostatic Discharge (ESD) to the
Optical Connector
Electromagnetic Interference (EMI)
Immunity
Laser Eye Safety and Equipment Type
Component Recognition
Testing
GR1089
FCC Class B
CENELEC EN55022 Class B
(CISPR 22A)
US FDA CDRH AEL Class 1
US21 CFR, Subchapter J per Paragraphs 1002.10 and
1002.12.
(IEC) EN60825-1: 1994 + A11+A2
(IEC) EN60825-2: 1994 + A1
(IEC) EN60950: 1992 + A1 + A2 + A3
Underwriters Laboratories and Canadian Standards
Information Technology Equipment Including Electrical
Business Equipment
Test Method
JEDEC JESD22-A114-B
Variation of IEC 801-2
VCCI Class 1
Variation of IEC 61000-4-3
+ A4 + A11
Association Joint Component Recognition for
of the HFCT-711XPD is compatible with typical industry
production environments.
The second condition is static discharge to the exterior
of the host equipment chassis after installation. To the
extent that the duplex LC optical interface is exposed to
the outside of the host equipment chassis, it may be
subject to system-level ESD requirements.
The ESD performance of the HFCT-711XPD exceeds
typical industry standards.
Immunity
The transceivers have a shielded design to provide
excellent immunity to radio-frequency electromagnetic
fields which may be present in some operating
environments.
Electromagnetic Interference (EMI)
Most equipment designs using the HFCT-711XPD are
subject to the requirements of the FCC in the United
States, CENELEC EN55022 (CISPR 22) in Europe and VCCI
in Japan. The metal housing and shielded design of the
HFCT-711XPD minimizes EMI and provides excellent EMI
performance.
Performance
1000 Volts
10 discharges of both polarities of 8 KV on the
panel.
board and chassis design.
Less than 0.5 dB of Rx sensitivity degradation
CDRH certification # 9521220-100
UL certificate number 05012004-E173874
electrical faceplate with device inserted into a
Air discharge of 15 kV(min) contact to
connector w/o damage
System margins are dependent on customer
and less than 10% margin reduction of Tx mask
at 10 V/m, 10 MHZ to 1 GHz w/o chassis
enclosure
TUV file # 933/510312/02