AFBR-5805ATZ Avago Technologies US Inc., AFBR-5805ATZ Datasheet - Page 8

• Manufacturer Part Number: AFBR-5805ATZ
• Description: TXRX ATM SONET OC3 3V ST 1X9
• Manufacturer: Avago Technologies US Inc.

Specifications of AFBR-5805ATZ

• Applications: General Purpose
• Wavelength: 1310nm
• Voltage - Supply: 3.3V
• Connector Type: ST
• Mounting Type: Through Hole
• Data Rate Max: 0.1Gbps
• Supply Voltage: 5V
• Wavelength Typ: 1300nm
• Leaded Process Compatible: Yes
• Optical Fiber Type: TX/RX
• Data Transfer Rate: 100Mbps
• Optical Rise Time: 3/2.2ns
• Optical Fall Time: 3/2.2ns
• Jitter: 1.2/1.91ns
• Operating Temperature Classification: Commercial
• Peak Wavelength: 1380nm
• Operating Supply Voltage (min): 3.135/4.75V
• Operating Supply Voltage (typ): 3.3/5V
• Operating Supply Voltage (max): 3.5/5.25V
• Output Current: 50mA
• Operating Temp Range: -10C to 85C
• Mounting: Through Hole
• Pin Count: 9
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Data Rate: -
• Lead Free Status / Rohs Status: Compliant

Board Layout - Hole Pattern
The Avago Technologies transceiver complies with the
circuit board “Common Transceiver Footprint” hole pat-
tern defined in the original multisource announcement
which defined the 1 x 9 package style. This drawing is
reproduced in Figure 8 with the addition of ANSI Y14.5M
compliant dimensioning to be used as a guide in the
mechanical layout of your circuit board.
Board Layout - Mechanical
For applications interested in providing a choice of
either a duplex SC or a duplex ST connector interface,
while utilizing the same pinout on the printed circuit
board, the ST port needs to protrude from the chassis
panel a minimum of 9.53 mm for sufficient clearance to
install the ST connector.
Please refer to Figure 8a for a mechanical layout detail-
ing the recommended location of the duplex SC and
duplex ST transceiver packages in relation to the chassis
panel.

Figure 8a. Recommended Common Mechanical Layout for SC and
ST 1 x 9 Connectored Transceivers.
(0.800)
0.51
0.75
Figure 8. Recommended Board Layout Hole Pattern
20.32
(0.100)
NOTE 1: MINIMUM DISTANCE FROM FRONT
OF CONNECTOR TO THE PANEL FACE.
2.54
11.1
12.0
TOP VIEW
(0.800)
20.32
(NOTE 1)
9.53
6.79
DIMENSIONS ARE IN MILLIMETERS (INCHES)
42.0
39.12
(0.075 ± 0.004)
2 x Ø 1.9 ± 0.1
(0.032 ± 0.004)
9 x Ø 0.8 ± 0.1
24.8
25.4
25.4