CU40025-UW6J Noritake Company Inc, CU40025-UW6J Datasheet - Page 14

• Manufacturer Part Number: CU40025-UW6J
• Description: MODULE VF DISPLAY 40X2 5MM CHAR
• Manufacturer: Noritake Company Inc
• Series: U-Versionr

Specifications of CU40025-UW6J

• Outline L X W X H: 182.00mm x 33.50mm x 20.50mm
• Viewing Area: 138.80mm L x 11.50mm W
• Display Format: 40 x 2
• Display Type: Character
• Format: 5 x 7 Dots
• Voltage - Supply: 5V
• Character Size: 4.70mm H x 2.30mm W
• Operating Temperature: -40°C ~ 85°C
• Resolution: 2 X 40
• Viewing Area (h X W): 11.5mm X 138.8mm
• Supply Current: 300mA
• Supply Voltage Range: 4.75V To 5.25V
• Character Format: Dot Matrix
• Character Type: 5x7 Dot Matrix
• External Depth: 21mm
• External: RoHS Compliant
• Product: Character Display Modules
• Character Count X Line: 40 x 2
• Module Size (w X H X T): 182 mm x 33.5 mm x 20.5 mm
• Voltage Rating: 5 V
• Operating Temperature Range: - 40 C to + 85 C
• Current Rating: 300 mA
• Dot Format: 5 x 7
• Viewing Area (w X H): 138.8 mm x 11.5 mm
• Interface: Parallel / Serial
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Number Of Dots: -
• Lead Free Status / Rohs Status: Details
• Other names: 286-1062

8.4. Jumper
Some jumpers are prepared on the PCB board, to set operating mode of the display module. A
soldering iron is required to short jumper.
No2 and No3 of jumper ‘JP4’ is used to reset of module.
You can reset the module by shorting No2 and No3 of the jumper ‘JP4’ for some interval
which is longer than 10µs.
The following figure shows the location of each jumper.
Location
The following table shows the function of No 1 and No 2 of JP4, JP2, JP9.
CU40025-UW6J is no reset inputs and M68 CPU bus parallel interface at default setting.
Reset input signal is active when it is low.
Table of No 1 and No 2 of JP4 setting
NC: no connection
Table of JP9 setting
Table of JP2 setting
JP1 and JP5 to JP8 are factory use only.
No 1 and No 2 of JP4
Open
Short
open
short
JP9
JP2
short
open
CPU bus mode
M68 type
i80 type
Parallel interface
Serial interface
L1
Interface
and No 6 of CN3
No 3 of CN2
Control signals
RESET
NC
WR, RD
E,R/W
13
Parts Side
2
3
1
IC2
CU40025-UW6J