NHD-160128WG-BTMI-VZ#-1 Newhaven Display, NHD-160128WG-BTMI-VZ#-1 Datasheet - Page 37

• Manufacturer Part Number: NHD-160128WG-BTMI-VZ#-1
• Description: LCD MOD GRAPH 160X128 WH TRANSFL
• Manufacturer: Newhaven Display

Specifications of NHD-160128WG-BTMI-VZ#-1

• Display Type: STN - Super-Twisted Nematic
• Display Mode: Transflective
• Viewing Area: 101.00mm L x 82.00mm W
• Backlight: LED - White
• Dot Size: 0.56mm W x 0.56mm H
• Dot Pitch: 0.60mm x 0.60mm
• Dot Pixels: 160 x 128
• Pixel Density: 160 x 128
• Fluid Type: STN Negative
• Module Size (w X H X T): 129 mm x 102 mm x 14 mm
• Backlighting: LED White
• Background Color: Blue
• Operating Temperature Range: - 20 C to + 70 C
• Style: LCD Graphic Display
• Interface: Parallel
• For Use With: NHDEV - BOARD DEV LCD COG TFT 100X95MM
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: NHD-160128WG-BTMI-VZ#; NHD-160128WG-BTMI-VZ# ; NHD-160128WG-BTMI-VZ#

High Temperature
storage
Low Temperature
storage
High Temperature
Operation
Low Temperature
Operation
High Temperature/
Humidity Operation
Thermal shock resistance
Vibration test
Static electricity test
12.RELIABILITY
Content of Reliability Test (wide temperature, -20 ~70 )
Note1: No dew condensation to be observed.
Note2: The function test shall be conducted after 4 hours storage at the normal
Note3: Vibration test will be conducted to the product itself without putting it in a container.
Test Item
Temperature and humidity after remove from the test chamber.
Endurance test applying the high storage
temperature for a long time.
Endurance test applying the high storage
temperature for a long time.
Endurance test applying the electric stress
(Voltage & Current) and the thermal stress to the
element for a long time.
Endurance test applying the electric stress under
low temperature for a long time.
The module should be allowed to stand at 60
For 96hrs under no-load condition excluding the
polarizer,
Then taking it out and drying it at normal
temperature.
The sample should be allowed stand the
following 10 cycles of operation
Endurance test applying the vibration during
transportation and using.
Endurance test applying the electric stress to the
terminal.
,90%RH max
-20
30min
1 cycle
5min
Content of Test
25
Environmental Test
Page 39 of 49
30min
70
80
200hrs
-30
200hrs
70
200hrs
-20
200hrs
60 ,90%RH
96hrs
-20 /70
10 cycles
Total fixed amplitude :
1.5mm
Vibration Frequency :
10~55Hz
One cycle 60 seconds
to 3 directions of X,Y,Z
for
minutes
VS=800V,RS=1.5k
CS=100pF
1 time
Test Condition
Each 15
Note
——
——
——
1,2
1,2
2
1
3