NHD-160128WG-BTMI-VZ#-1 Newhaven Display, NHD-160128WG-BTMI-VZ#-1 Datasheet - Page 12

• Manufacturer Part Number: NHD-160128WG-BTMI-VZ#-1
• Description: LCD MOD GRAPH 160X128 WH TRANSFL
• Manufacturer: Newhaven Display

Specifications of NHD-160128WG-BTMI-VZ#-1

• Display Type: STN - Super-Twisted Nematic
• Display Mode: Transflective
• Viewing Area: 101.00mm L x 82.00mm W
• Backlight: LED - White
• Dot Size: 0.56mm W x 0.56mm H
• Dot Pitch: 0.60mm x 0.60mm
• Dot Pixels: 160 x 128
• Pixel Density: 160 x 128
• Fluid Type: STN Negative
• Module Size (w X H X T): 129 mm x 102 mm x 14 mm
• Backlighting: LED White
• Background Color: Blue
• Operating Temperature Range: - 20 C to + 70 C
• Style: LCD Graphic Display
• Interface: Parallel
• For Use With: NHDEV - BOARD DEV LCD COG TFT 100X95MM
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: NHD-160128WG-BTMI-VZ#; NHD-160128WG-BTMI-VZ# ; NHD-160128WG-BTMI-VZ#

MSB
Flowchart of communications with MPU
(1)Status Read
STA7
STA0
STA1
STA2
STA3
STA4
STA5
STA6
STA7
D7
A status check must be performed before data is read or written.
Status check
The Status of T6963C can be read from the data lines.
The T6963C status word format is as follows:
(Note 1) It is necessary to check STA0 and STA1 at the same time.
(Note 2) For most modes STA0/STA1 are used as a status check.
(Note 3) STA2 and STA3 are valid in Auto mode; STA0 and STA1 are invalid.
Status Checking flow
C/D
Do to D7
RD
WR
CE
Check command execution capability
Check data read/write Capability
Check Auto mode data read capability
Check Auto mode data write capability
Not used
Check controller operation capability
Error flag. Used for Screen Peek and Screen copy
commands.
Check the blink condition
STA6
There is a possibility of erroneous operation due to a hardware interrupt.
D6
L
H
L
H
H
STA5
D5
STA4
D4
STA3
Page 13 of 49
D3
STA2
D2
0:Disable
1:Enable
0:Disable
1:Enable
0:Disable
1:Enable
0:Disable
1:Enable
0:Disable
1:Enable
0:No error
1:Error
0:Disable off
1:Normal display
STA1
D1
STA0
LSB
D0