HCPL-4200#300 Avago Technologies US Inc., HCPL-4200#300 Datasheet - Page 13

• Manufacturer Part Number: HCPL-4200#300
• Description: OPTOCOUPLER 20MA LOOP 8-SMD GW
• Manufacturer: Avago Technologies US Inc.
• Type: Receiverr

Specifications of HCPL-4200#300

• Package / Case: 8-SMD Gull Wing
• Voltage - Isolation: 3750Vrms
• Input Type: DC
• Voltage - Supply: 4.5 V ~ 20 V
• Operating Temperature: 0°C ~ 70°C
• Mounting Type: Surface Mount
• Logic Gate Type: AND
• Maximum Baud Rate: 20 KBps
• Configuration: 1 Channel
• Isolation Voltage: 3750 Vrms
• Output Type: Open Collector
• Maximum Propagation Delay Time: 1.6 us
• Maximum Forward Diode Current: 24 mA
• Maximum Continuous Output Current: 25 mA
• Maximum Power Dissipation: 255 mW
• Maximum Operating Temperature: + 70 C
• Minimum Operating Temperature: 0 C
• Number Of Elements: 1
• Baud Rate: 20Kbps
• Forward Current: 30mA
• Output Current: 25mA
• Package Type: PDIP SMD
• Operating Temp Range: 0C to 70C
• Power Dissipation: 255mW
• Propagation Delay Time: 1600ns
• Pin Count: 8
• Mounting: Surface Mount
• Operating Temperature Classification: Commercial
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Contains lead / RoHS non-compliant

of common mode influences, elimination of ground
potential differences and reduction of power supply re-
quirements. With this combination of HCPL-4100/-4200
optocouplers, specific current loop noise immunity is
provided, i.e., minimum SPACE state current noise im-
munity is 1 mA, MARK state noise immunity is 8 mA.
Figure 21. Full Duplex Point-to-Point Current Loop System Configuration.
Figure 22. Half Duplex Current Loop System Configurations for (a) Point-to-Point, (b) Multidrop.
For product information and a complete list of distributors, please go to our website:
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries.
Data subject to change. Copyright © 2005-2010 Avago Technologies. All rights reserved. Obsoletes AV01-0541EN
AV02-2353EN - February 8, 2010
www.avagotech.com
Voltage compliance of the current source must be of an
adequate level for operating all units in the loop while
not exceeding 27 V dc, the maximum breakdown voltage
for the HCPL-4100. Note that the HCPL-4100 transmitter
will allow loop current to conduct when input V
is off. Consult the HCPL-4100 transmitter optocoupler
data sheet for specified device performance.
For more information about the HCPL-4100/-4200 opto-
couplers, consult Application Note 1018.
CC
power