PS9121-A NEC, PS9121-A Datasheet - Page 13
![PHOTOCOUPLER HS DGTL OC OUT S](/photos/7/67/76746/nec-5-sop_sml.jpg)
PS9121-A
Manufacturer Part Number
PS9121-A
Description
PHOTOCOUPLER HS DGTL OC OUT S
Manufacturer
NEC
Series
NEPOCr
Datasheet
1.PS9121-AX.pdf
(17 pages)
Specifications of PS9121-A
Voltage - Isolation
3750Vrms
Number Of Channels
1, Unidirectional
Current - Output / Channel
25mA
Data Rate
15Mbps
Propagation Delay High - Low @ If
40ns @ 7.5mA
Current - Dc Forward (if)
30mA
Input Type
DC
Output Type
Open Collector
Mounting Type
Surface Mount
Package / Case
5-SOP
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Other names
PS9121
Available stocks
Company
Part Number
Manufacturer
Quantity
Price
Company:
Part Number:
PS9121-AX
Manufacturer:
CEL
Quantity:
100
NOTES ON HANDLING
1. Recommended soldering conditions
(1) Infrared reflow soldering
(2) Wave soldering
(3) Soldering by Soldering Iron
• Peak reflow temperature
• Time of peak reflow temperature
• Time of temperature higher than 220°C
• Time to preheat temperature from 120 to 180°C
• Number of reflows
• Flux
• Temperature
• Time
• Preheating conditions
• Number of times
• Flux
• Peak Temperature (lead part temperature)
• Time (each pins)
• Flux
(a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead
(b) Please be sure that the temperature of the package would not be heated over 100°C
260°C or below (molten solder temperature)
10 seconds or less
120°C or below (package surface temperature)
One (Allowed to be dipped in solder including plastic mold portion.)
Rosin flux containing small amount of chlorine (The flux with a maximum chlorine
content of 0.2 Wt% is recommended.)
Recommended Temperature Profile of Infrared Reflow
120˚C
(preheating)
120±30 s
Data Sheet PN10502EJ05V0DS
350°C or below
3 seconds or less
Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
180˚C
260°C or below (package surface temperature)
10 seconds or less
60 seconds or less
120±30 s
Three
Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
Time (s)
(heating)
to 60 s
to 10 s
260˚C MAX.
220˚C
PS9121
11