TLE4250G Infineon Technologies, TLE4250G Datasheet - Page 12

• Manufacturer Part Number: TLE4250G
• Description: IC LOW DROP VOLT TRACKER SCT595
• Manufacturer: Infineon Technologies

Specifications of TLE4250G

• Package / Case: SCT-595
• Applications: Low Drop Voltage Tracker
• Voltage - Input: 4 ~ 40 V
• Current - Supply: 80µA
• Operating Temperature: -40°C ~ 150°C
• Mounting Type: Surface Mount
• Number Of Outputs: 1
• Polarity: Positive
• Input Voltage Max: 40 V
• Output Voltage: 5 V
• Output Type: Fixed
• Dropout Voltage (max): 0.3 V at 10 mA
• Output Current: 70 mA
• Line Regulation: 10 mV
• Load Regulation: 15 mV
• Voltage Regulation Accuracy: 0.5 %
• Maximum Operating Temperature: + 150 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Voltage - Supply: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: SP000012163; TLE4250GXT; TLE4250GXT

TLE 4250 G
Edition 2000-10-04
Published by Infineon Technologies AG,
St.-Martin-Strasse 53,
D-81541 München
©
Infineon Technologies AG 2000.
All Rights Reserved.
Attention please!
The information herein is given to describe
certain components and shall not be consid-
ered as warranted characteristics.
Terms of delivery and rights to technical
change reserved.
We hereby disclaim any and all warranties,
including but not limited to warranties of non-
infringement, regarding circuits, descriptions
and charts stated herein.
Infineon Technologies is an approved CECC
manufacturer.
Information
For further information on technology, deliv-
ery terms and conditions and prices please
contact your nearest Infineon Technologies
Office in Germany or our Infineon Technolo-
gies Representatives worldwide (see ad-
dress list).
Warnings
Due to technical requirements components
may contain dangerous substances. For in-
formation on the types in question please
contact your nearest Infineon Technologies
Office.
Infineon Technologies Components may only
be used in life-support devices or systems
with the express written approval of Infineon
Technologies, if a failure of such components
can reasonably be expected to cause the fail-
ure of that life-support device or system, or to
affect the safety or effectiveness of that de-
vice or system. Life support devices or sys-
tems are intended to be implanted in the hu-
man body, or to support and/or maintain and
sustain and/or protect human life. If they fail,
it is reasonable to assume that the health of
the user or other persons may be endan-
gered.
Data Sheet Rev. 2.2
12
2000-10-04