STMPS2262MTR STMicroelectronics, STMPS2262MTR Datasheet - Page 8

• Manufacturer Part Number: STMPS2262MTR
• Description: IC DUAL HIGH SIDE SWITCH 8SOIC
• Manufacturer: STMicroelectronics
• Type: High Side Switchr

Specifications of STMPS2262MTR

• Number Of Outputs: 2
• Rds (on): 115 mOhm
• Internal Switch(s): Yes
• Current Limit: 1A
• Voltage - Input: 2.7 ~ 5.5V
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: 8-SOIC (3.9mm Width)
• On Resistance (max): 120 mOhms
• Supply Voltage (max): 5.5 V
• Supply Voltage (min): 2.7 V
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 40 C
• Mounting Style: SMD/SMT
• Number Of Switches: Dual
• Off Time (max): 10 ms
• On Time (max): 5 ms
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 497-10056-2

Functional description
3
3.1
3.2
3.3
Note:
3.4
8/42
Functional description
Fault blanking
The STMPS devices feature a 10 ms fault blanking. Fault blanking allows current-limit faults,
including momentary short-circuit faults that occur when hot-swapping a capacitive load,
and also ensures that no fault is issued during power-up. When a load transient causes the
device to enter current limit, an internal counter starts. If the load fault persists beyond the
10 ms fault-blanking timeout, the FAULT output asserts “low”. Load-transient faults less than
10 ms (typ.) do not cause a FAULT output assertion. Only current-limit faults have fault-
blanking. Die overtemperature faults and input voltage drops below the UVLO threshold
cause an immediate fault output.
Overcurrent/overtemperature protection
In overcurrent or short-circuit condition, the switch limits the current at 500 mA for
STMPS2242/STMPS2252 and 1000 mA for STMPS2262/STMPS2272. If the temperature
of the die goes above the limit value, the switch turns OFF.
Reverse current blocking
When the switch is OFF, or when the STMPS device is not powered (V
behaves as a Hi-Z at the output pin, ensuring that no reverse current will flow into the device
when V
In the case where the switch is ON, and a voltage higher than V
reverse current will occur.
UVLO
When the input voltage drops below the threshold value, the power switch turns OFF to
prevent improper operation due to low voltage.
I
<V
O
.
Doc ID 15050 Rev 3
STMPS2242, STMPS2252, STMPS2262, STMPS2272
I
is applied to the OUT pin, a
CC
=0 V), the switch