IS42S16100C1-7TI ISSI, Integrated Silicon Solution Inc, IS42S16100C1-7TI Datasheet - Page 30

• Manufacturer Part Number: IS42S16100C1-7TI
• Description: IC SDRAM 16MBIT 143MHZ 50TSOP
• Manufacturer: ISSI, Integrated Silicon Solution Inc
• Type: SDRAMr

Specifications of IS42S16100C1-7TI

• Format - Memory: RAM
• Memory Type: SDRAM
• Memory Size: 16M (1M x 16)
• Speed: 143MHz
• Interface: Parallel
• Voltage - Supply: 3 V ~ 3.6 V
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 50-TSOPII
• Organization: 1Mx16
• Density: 16Mb
• Address Bus: 12b
• Access Time (max): 6/5.5ns
• Maximum Clock Rate: 143MHz
• Operating Supply Voltage (typ): 3.3V
• Package Type: TSOP-II
• Operating Temp Range: -40C to 85C
• Operating Supply Voltage (max): 3.6V
• Operating Supply Voltage (min): 3V
• Supply Current: 150mA
• Pin Count: 50
• Mounting: Surface Mount
• Operating Temperature Classification: Industrial
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

30
IS42S16100C1
Interval Between Read and Write Commands
A read command can be interrupted and a new write
command executed while the read cycle is in progress,
i.e., before that cycle completes. Data corresponding
to the new write command can be input at the point
new write command is executed. To prevent collision
between input and output data at the DQn pins during
this operation, the
CAS latency = 2, 3, burstlength = 4
COMMAND
U/LDQM
CLK
DQ
READ (CA=A, BANK 0)
READ A0
HI-Z
D
WRITE B0
IN
t
CCD
B0
WRITE (CA=B, BANK 0)
D
IN
B1
D
output data must be masked using the U/LDQM pins.The
interval (t
one clock cycle.
The selected bank must be set to the active state before
executing this command.
IN
B2
Integrated Silicon Solution, Inc. — www.issi.com
ccd
D
IN
) between these commands must be at least
B3
08/24/09
Rev. F