ESD8V0L1B-02LRHE6327 Infineon Technologies, ESD8V0L1B-02LRHE6327 Datasheet - Page 9

• Manufacturer Part Number: ESD8V0L1B-02LRHE6327
• Description: TVS Diodes - Transient Voltage Suppressors TVS DIODE 1 Ch 20-26 V 2A
• Manufacturer: Infineon Technologies
• Series: ESD8V0r

Specifications of ESD8V0L1B-02LRHE6327

• Product Category: TVS Diodes - Transient Voltage Suppressors
• Rohs: yes
• Polarity: Bidirectional
• Operating Voltage: 14 V
• Breakdown Voltage: 14.5 V
• Clamping Voltage: 26 V
• Peak Surge Current: 2.5 A
• Package / Case: TSLP-2-7
• Minimum Operating Temperature: - 55 C
• Maximum Operating Temperature: + 125 C
• Capacitance: 13 pF
• Channels: 1 Channel
• Dimensions: 0.6 mm W x 1 mm L
• Factory Pack Quantity: 15000
• Termination Style: SMD/SMT

ESD8V0L...
Edition 2009-11-16
Published by
Infineon Technologies AG
81726 Munich, Germany
 2009 Infineon Technologies AG
All Rights Reserved.
Legal Disclaimer
The information given in this document shall in no event be regarded as a guarantee
of conditions or characteristics. With respect to any examples or hints given herein,
any typical values stated herein and/or any information regarding the application of
the device, Infineon Technologies hereby disclaims any and all warranties and
liabilities of any kind, including without limitation, warranties of non-infringement of
intellectual property rights of any third party.
Information
For further information on technology, delivery terms and conditions and prices,
please contact the nearest Infineon Technologies Office (<www.infineon.com>).
Warnings
Due to technical requirements, components may contain dangerous substances.
For information on the types in question, please contact the nearest Infineon
Technologies Office.
Infineon Technologies components may be used in life-support devices or systems
only with the express written approval of Infineon Technologies, if a failure of such
components can reasonably be expected to cause the failure of that life-support
device or system or to affect the safety or effectiveness of that device or system.
Life support devices or systems are intended to be implanted in the human body or
to support and/or maintain and sustain and/or protect human life. If they fail, it is
reasonable to assume that the health of the user or other persons may be
endangered.
2012-09-07
9