MA300E12_EVAL Infineon Technologies, MA300E12_EVAL Datasheet - Page 5

• Manufacturer Part Number: MA300E12_EVAL
• Description: Power Management IC Development Tools MOD ADPTR BRD FOR 1200V PRIMEPACK IGBT
• Manufacturer: Infineon Technologies

Module Adapter Board
for PrimePACK
2
Electrical features of the evaluation board and mechanical dimensions including necessary interface
connections are presented in the following sections.
2.1
The MA300Exx module adapter board offers the following features:
When the MA300Exx is not used with 2ED300E17-SFO adapter board and 2ED300C17-S /-ST
EiceDRIVER™ these additional features might be useful:
Figure 2
Dual channel IGBT driver together with 2ED300E17-SFO (detailed description in AN2007-05)
and 2ED300C17-S /-ST EiceDRIVER™
Electrically and mechanically suitable for PrimePACK™ modules family
Operating temperature (design target) from -55°C to 85°C
Different gate resistor values for turning-on and -off are possible
IGBTs are protected against temporary V
Diodes for IGBT desaturation monitoring implemented (short circuit protection)
Base plate temperature monitoring by internal NTC resistor
All components, except connectors, are surface mount devices (SMD) with lead free 260°C
soldering profile
PCB is designed to fulfill the requirements of IEC61800-5-1, pollution degree 2, overvoltage
category III (creepage – 11mm)
Gate-emitter amplifier input resistance is 37
Can be used with max. ±20V isolated power supply (due to IGBT short circuit performance a max.
V
Asymmetric power supply is also allowed e.g. -8V and +15V
Input PWM voltage level should be selected according to the power supply voltage level. If an
asymmetrical supply voltage of -8V/+15V is applied, the PWM signal should not be higher than
+15V and should not be lower than -8V
GE
of +15V is suggested)
Design features
Main features
The ‘Flexible driver Starter Kit’ for PrimePACK™ module
TM
IGBT Modules
CE
overvoltages during turn-off (Active Clamping)
5
Application Note AN 2007-06
V1.2, June 2010